Editing John Deere Blitz Black paint
Line 1: | Line 1: | ||
+ | {{Youcanedit}} | ||
==Summary== | ==Summary== | ||
Line 11: | Line 12: | ||
==Application== | ==Application== | ||
#If the existing paint isn't peeling or doesn't have large amounts of [[rust]], then no [[Epoxy primer|primer]] is necessary. [[Sand]] with extra fine grit sand paper, wipe with a clean cloth and apply JDBB paint. | #If the existing paint isn't peeling or doesn't have large amounts of [[rust]], then no [[Epoxy primer|primer]] is necessary. [[Sand]] with extra fine grit sand paper, wipe with a clean cloth and apply JDBB paint. | ||
− | |||
#For spraying with an HVLP gun, use a 1.4 or 1.5 tip. | #For spraying with an HVLP gun, use a 1.4 or 1.5 tip. | ||
#If a primer is needed, JDBB primer is recommended (it's available in spray cans, quarts, and gallons). Wait 36 hours after applying primer to apply paint. | #If a primer is needed, JDBB primer is recommended (it's available in spray cans, quarts, and gallons). Wait 36 hours after applying primer to apply paint. | ||
− | #John Deere thinner is needed, at a mix ratio of 8 parts JDBB paint:1 part John Deere thinner | + | #John Deere thinner is needed, at a mix ratio of 8 parts JDBB paint:1 part John Deere thinner. |
#For faster-drying and harder paint, John Deere hardener can be used. It's available in pints. When using the hardener, the mix ratio is 8 parts JDBB paint:1 part John Deere thinner:1 part John Deere hardener. | #For faster-drying and harder paint, John Deere hardener can be used. It's available in pints. When using the hardener, the mix ratio is 8 parts JDBB paint:1 part John Deere thinner:1 part John Deere hardener. | ||
#Spray one light tack coat, wait 10-15 minutes, then shoot the full wet coat. | #Spray one light tack coat, wait 10-15 minutes, then shoot the full wet coat. | ||
Line 28: | Line 28: | ||
*Striping of the paint is thought to be caused by the reducer drying too fast. To eliminate striping, some people recommend using regular enamel reducer instead of the John Deere reducer for a slower evaporation rate. | *Striping of the paint is thought to be caused by the reducer drying too fast. To eliminate striping, some people recommend using regular enamel reducer instead of the John Deere reducer for a slower evaporation rate. | ||
*Hold the gun at a 90 degree angle to the surface and keep a 50% overlap. | *Hold the gun at a 90 degree angle to the surface and keep a 50% overlap. | ||
− | |||
*John Deere Blitz Black paint can't be applied to high heat areas such as engine blocks, headers, or pipes. Also, it will not retard rust. | *John Deere Blitz Black paint can't be applied to high heat areas such as engine blocks, headers, or pipes. Also, it will not retard rust. | ||
*Some people report success applying it to [[Fiberglassing|fiberglass]]. | *Some people report success applying it to [[Fiberglassing|fiberglass]]. | ||
Line 41: | Line 40: | ||
*John Deere Primer: TY25659 (Formerly TY6457) | *John Deere Primer: TY25659 (Formerly TY6457) | ||
*John Deere Reducer: TY25650 (Formerly PT158) | *John Deere Reducer: TY25650 (Formerly PT158) | ||
− | *John Deere Hardener: REN3001 | + | *John Deere Hardener: REN3001 |
Additional part numbers/updates: | Additional part numbers/updates: | ||
Line 51: | Line 50: | ||
==Where to get John Deere Blitz Black paint== | ==Where to get John Deere Blitz Black paint== | ||
*[http://dealerlocator.deere.com/servlet/DealerLocator?command=home&locator=3&selectLocale=en_US&sessionId=Rgf865DJYGDkmUUhinR1QMN John Deere dealer locator] | *[http://dealerlocator.deere.com/servlet/DealerLocator?command=home&locator=3&selectLocale=en_US&sessionId=Rgf865DJYGDkmUUhinR1QMN John Deere dealer locator] | ||
− | |||
− | |||
==Photographs of John Deere Blitz Black paint jobs== | ==Photographs of John Deere Blitz Black paint jobs== | ||
Line 82: | Line 79: | ||
*[http://www.autopaintdirect.com/rat.html Valspar Rat Rod Black] | *[http://www.autopaintdirect.com/rat.html Valspar Rat Rod Black] | ||
*[http://www.kirkerautomotive.com/html/hot_rod_black.html Kirker Hot Rod Black] | *[http://www.kirkerautomotive.com/html/hot_rod_black.html Kirker Hot Rod Black] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
== References == | == References == | ||
Line 95: | Line 87: | ||
[[Category:Body and exterior]] | [[Category:Body and exterior]] | ||
[[Category:Good articles]] | [[Category:Good articles]] | ||
+ | {{youcanedit}} |