John Deere Blitz Black paint

Jump to: navigation, search
Line 1: Line 1:
Is it considered to be good paint?
 
Is a specific primer needed?
 
Is reducer needed?
 
How many coats are needed?
 
Does it apply like paint?
 
Would a clearcoat adhere to it?
 
 
 
==Summary==
 
==Summary==
 
John Deere Blitz Black is enamel paint manufactured by Valspar Paint for John Deere, for the purpose of painting farm equipment. It's popular among hotrodders because it's an inexpensive and durable finish for vehicles, that provides the look of a primered "rat" or "traditional" hot rod (described as: "flat", "suede", "satin", or "semi-gloss"). It's weatherproof, and blocks UV light, where a bare primer would soak up water and oils.
 
John Deere Blitz Black is enamel paint manufactured by Valspar Paint for John Deere, for the purpose of painting farm equipment. It's popular among hotrodders because it's an inexpensive and durable finish for vehicles, that provides the look of a primered "rat" or "traditional" hot rod (described as: "flat", "suede", "satin", or "semi-gloss"). It's weatherproof, and blocks UV light, where a bare primer would soak up water and oils.
Line 14: Line 7:
 
#If the existing paint doesn't have peeling paint or large amounts of rust, then no primer is necessary. Sand with extra fine grit sand paper, wipe with a clean cloth, and then apply JDBB paint.
 
#If the existing paint doesn't have peeling paint or large amounts of rust, then no primer is necessary. Sand with extra fine grit sand paper, wipe with a clean cloth, and then apply JDBB paint.
 
#If a primer is needed, JDBB primer is recommended (available in spray cans, quarts, and gallons).
 
#If a primer is needed, JDBB primer is recommended (available in spray cans, quarts, and gallons).
#JDBB reducer is needed, at a mix ratio of 8 parts JDBB paint to 1 part JDBB thinner.
+
#JDBB reducer is needed, at a mix ratio of 8 parts JDBB paint:1 part John Deere thinner.
 +
#For faster-drying and harder paint, John Deere hardener can be used. It's part number REN3001, and it's available in pints. When using the hardener, the mix ration is 8 parts JDBB paint:1 part John Deere thinner to 1 part John Deere hardener.
  
 
==Can I use a clearcoat with John Deere Blitz Black paint?==
 
==Can I use a clearcoat with John Deere Blitz Black paint?==

Revision as of 19:50, 12 July 2006

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox