Body and exterior tips

Jump to: navigation, search
(Sanding -- '''click the [edit] link on the right to edit ==>''')
(Taping and masking -- '''click the [edit] link on the right to edit ==>''')
Line 63: Line 63:
 
*When calculating sandpaper costs, bear in mind that used sandpaper takes longer to use. To save on labor costs, it may be beneficial to discard sandpaper before it is completely used.
 
*When calculating sandpaper costs, bear in mind that used sandpaper takes longer to use. To save on labor costs, it may be beneficial to discard sandpaper before it is completely used.
  
==Taping and masking -- '''click the [edit] link on the right to edit ==>'''==
+
==Taping and masking -- click the [edit] link on the right to edit or add tips ==> ==
 
*When painting up to a rubber gasket (like a windshield), place a length of rubber vacuum line, plastic tubing, clothesline, or weed trimming string under the gasket. When the paint is dry, pull the line out. It will look like the gasket was removed for painting. Even if it shrinks over time, it won't expose old color. If the gasket won't lay back down, use a heat gun (after the paint has fully cured). Similarly, 3M makes a product called "trim masking tape" for this purpose.
 
*When painting up to a rubber gasket (like a windshield), place a length of rubber vacuum line, plastic tubing, clothesline, or weed trimming string under the gasket. When the paint is dry, pull the line out. It will look like the gasket was removed for painting. Even if it shrinks over time, it won't expose old color. If the gasket won't lay back down, use a heat gun (after the paint has fully cured). Similarly, 3M makes a product called "trim masking tape" for this purpose.
 
*Before applying clearcoat, re-mask windows and other body parts with fresh paper (taping over the existing paper is fine). This will prevent dust from previous coats from contaminating the clearcoat.
 
*Before applying clearcoat, re-mask windows and other body parts with fresh paper (taping over the existing paper is fine). This will prevent dust from previous coats from contaminating the clearcoat.

Revision as of 21:32, 14 July 2006

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox