Body and exterior tips

Jump to: navigation, search
(→Taping and masking)
(0.25)
Line 28: Line 28:
 
Hi, http://ramonestes.freehostingz.com/skateboard9108.html skateboard,  6957, http://charlesscott.2222mb.com/skateboard6145.html more info,  %-OOO, http://richinnyd.domaingler.com/skateboard5162.html skateboard,  089, http://richinnyd.ourfreewebhosting.com/skateboard5797.html skateboard,  :-D, http://ronnieburns.freehostingz.com/green2801.html download,  ogoq, http://autumnbeck.yourfreehosting.net/green1887.html more info,  7234, http://geraldhernandez.2222mb.com/green4392.html more info,  120, http://richinnyd.2222mb.com/skateboard5766.html more info,  >:DD, http://richinnyd.ourfreewebhosting.com/green7534.html more info,  :OO, http://richinnyd.hostaim.com/skateboard7969.html skateboard,  nfqyhx,
 
Hi, http://ramonestes.freehostingz.com/skateboard9108.html skateboard,  6957, http://charlesscott.2222mb.com/skateboard6145.html more info,  %-OOO, http://richinnyd.domaingler.com/skateboard5162.html skateboard,  089, http://richinnyd.ourfreewebhosting.com/skateboard5797.html skateboard,  :-D, http://ronnieburns.freehostingz.com/green2801.html download,  ogoq, http://autumnbeck.yourfreehosting.net/green1887.html more info,  7234, http://geraldhernandez.2222mb.com/green4392.html more info,  120, http://richinnyd.2222mb.com/skateboard5766.html more info,  >:DD, http://richinnyd.ourfreewebhosting.com/green7534.html more info,  :OO, http://richinnyd.hostaim.com/skateboard7969.html skateboard,  nfqyhx,
  
−
==Body filler==
+
http://honey.hothostcity.com/shooting8c/ more info
−
*For body lines and peaks on hoods or doors, use a contour gauge to make a custom plastic filler spreader:
+
−
#Place the contour gauge on an undamaged area to get the contour.
+
−
#Trace the contour onto a plastic body filler spreader.
+
−
#Trim out the shape on the spreader.
+
−
*Cut filler spreaders to the desired size.
+
−
*To clean body filler spreaders, use 1/4 of a 3M scuff pad with lacquer thinner on it. A metal quart can with a lid makes a safe way to store the scuff pad along with some lacquer thinner. 
+
−
*For reproducing small parts such as gaskets, use plastic body filler to make a mold:
+
−
#If the part doesn't already exist, a replica has to be made in its shape (for example, carve it out of soft plastic).
+
−
#Apply some wax to the part (this will act as a mold release), and lay it down on a piece of wax paper.
+
−
#Mix up some body filler, and place it in a small cup or bowl (the cap on a plastic jug may work).
+
−
#While the filler is still wet, place it over the part.
+
−
#When the filler hardens, it can be removed and used as a mold.
+
−
*When applying body filler upside down, apply the filler to a sheet of thin plastic (such as the side of a milk jug) and press it into place. When the filler hardens, peel the plastic away.
+
−
*use an aluminum ruler to find high and low spots such as doors..hood to fender..or trunk lid to fender ect..
+
−
&if using filler with hatonite you can sand filler while still tacky this will shread the filler smooth easily with hardly any pressure,when finished follow up with a poyester glase or add filler thinner to your finale coat of filler.
+
  
 
==Cleanliness==
 
==Cleanliness==

Revision as of 07:12, 25 July 2008

Retrieved from "https://www.crankshaftcoalition.com/wiki/index.php?title=Body_and_exterior_tips&oldid=7974"
Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox
 
Terms of Use
Copyright
Privacy Policy