Cam and compression ratio compatibility
m (→Dynamic compression ratio calculators) |
(→Dynamic compression ratio) |
||
| Line 123: | Line 123: | ||
*[http://www.rbracing-rsr.com/comprAdvHD.htm RSR DCR calculator] | *[http://www.rbracing-rsr.com/comprAdvHD.htm RSR DCR calculator] | ||
{{Note1}} Some dynamic compression rtatio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point figure. This works OK on older, slower ramped cam lobes, but the faster lobe profiles may need to have 25 degrees or more added to be accurate. | {{Note1}} Some dynamic compression rtatio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point figure. This works OK on older, slower ramped cam lobes, but the faster lobe profiles may need to have 25 degrees or more added to be accurate. | ||
| + | |||
| + | {{Note1}}If the intake valve closing (IVC) point isn't known, it can be calculated: | ||
| + | # Divide the intake duration by 2 | ||
| + | # Add the results to the lobe separation angle (LSA) | ||
| + | # Subtract any ground-in advance | ||
| + | # Subtract 180 | ||
| + | |||
| + | |||
| + | ==Compression ratio calculators== | ||
| + | ===Static CR=== | ||
| + | *[http://www.wheelspin.net/calc/calc2.html SCR] | ||
| + | |||
| + | ===Dynamic CR=== | ||
| + | *[http://www.empirenet.com/pkelley2/DynamicCR.html Dynamic compression calculator] by Kelly | ||
| + | *[http://www.uempistons.com/calc.php?action=comp2 Dynamic compression calculator] by KB | ||
| + | *[http://www.wallaceracing.com/dynamic-cr.php Wallace Racing DCR calculator] | ||
| + | *[http://www.rbracing-rsr.com/comprAdvHD.htm RSR DCR calculator] | ||
| + | {{Note1}} Some dynamic compression ratio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point figure. This works OK on older, slower ramped cam lobes, but the faster lobe profiles may need to have 25 degrees or more added to be accurate.<br> | ||
| + | |||
| + | {{Note1}}If the intake valve closing (IVC) point isn't known, it can be calculated: | ||
| + | # Divide the intake duration by 2 | ||
| + | # Add the results to the lobe separation angle (LSA) | ||
| + | # Subtract any ground-in advance | ||
| + | # Subtract 180 | ||
===Static compression ratio=== | ===Static compression ratio=== | ||
Your Privacy Choices