John Deere Blitz Black paint

Jump to: navigation, search
Line 14: Line 14:
 
#For spraying with an HVLP gun, use a 1.4 or 1.5 tip.
 
#For spraying with an HVLP gun, use a 1.4 or 1.5 tip.
 
#If a primer is needed, JDBB primer is recommended (it's available in spray cans, quarts, and gallons). Wait 36 hours after applying primer to apply paint.
 
#If a primer is needed, JDBB primer is recommended (it's available in spray cans, quarts, and gallons). Wait 36 hours after applying primer to apply paint.
#John Deere thinner is needed, at a mix ratio of 8 parts JDBB paint:1 part John Deere thinner.
+
#John Deere thinner is needed, at a mix ratio of 8 parts JDBB paint:1 part John Deere thinner (The Blitz Black can recommends a mix ratio of 10:1 paint to thinner).
(The Blitz Black can recommends a mix ratio of 10:1 paint to thinner).
+
 
#For faster-drying and harder paint, John Deere hardener can be used. It's available in pints. When using the hardener, the mix ratio is 8 parts JDBB paint:1 part John Deere thinner:1 part John Deere hardener.
 
#For faster-drying and harder paint, John Deere hardener can be used. It's available in pints. When using the hardener, the mix ratio is 8 parts JDBB paint:1 part John Deere thinner:1 part John Deere hardener.
 
#Spray one light tack coat, wait 10-15 minutes, then shoot the full wet coat.
 
#Spray one light tack coat, wait 10-15 minutes, then shoot the full wet coat.

Revision as of 08:45, 31 January 2016

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox