Rewiring a vehicle
Chevythunder (Talk | contribs) |
Chevythunder (Talk | contribs) |
||
| Line 19: | Line 19: | ||
*Solder | *Solder | ||
*Shrink tube | *Shrink tube | ||
| + | *Read [[how to solder electrical connections]] if you are unsure how | ||
Next, the wiring harness in the vehicle must be removed. Be sure to label every disconnected or cut wire as to its original location. Keep the original harness intact as possible and UNPLUG EVERYTHING YOU CAN. Keeping this harness intact can help with understanding of how things were wired before the routing of wires. Once that is complete you are ready to begin installation of your new harness. | Next, the wiring harness in the vehicle must be removed. Be sure to label every disconnected or cut wire as to its original location. Keep the original harness intact as possible and UNPLUG EVERYTHING YOU CAN. Keeping this harness intact can help with understanding of how things were wired before the routing of wires. Once that is complete you are ready to begin installation of your new harness. | ||
Your Privacy Choices