Editing How to choose a SBC engine

Engine choices can be hard when there are so many to choose from. The choice of a SBC can be an easy one if you want a cheap reliable engine that can produce a good amount of horsepower. As a SBC can come in a size as small as 262 CI all the way to well over 400 CI in custom built engines, they all have their purpose. You wouldn't put a 262 in a truck, but you may put it in a Monza if you want [[Improving fuel economy|MPG]]. * 262 CI: Used in 1975, low hp, smog engine designed for reliability with high MPG. Only used with the Chevrolet Nova and Monza (with 4.3L badges when optioned with the Monza) - NOT to be confused with the 1985-2014 4.3L V6-90 which has the bore/stroke of the SBC 350. * 265 CI: Chevrolet's first SBC. Far surpassed in performance by the 283 and 327 engines that came shortly after. Consider this one for restorations only (unless you like a challenge). * 267 CI: Used from 1978-1981, low hp, smog engine designed for reliability with high MPG. * 283 CI: Chevy's first engine to produce 1hp per CI. Provides hp in the higher RPM, good for [[Reducing vehicle weight|light cars]] and higher RPM in performance applications. * 301 CI: This is a 0.125" overbored SBC 283, it needs a block with thick cylinder walls (recommend sonic testing first) and is no longer recommended (or necessary) practice, instead the preferred method is to use a 350 block and a 283 crank with spacer bearings if you want to build one. Actual displacement is 301.6 cid. * 302 CI: The first Z/28 engine (1967-'69). Great for high RPM hp and was mandated for T/A racing. Original SBC 302 engines and 302-specific parts are usually very expensive. * 305 CI: Decent engine, many consider it too small for hi-performance, but decent enough for street performance in a [[Reducing vehicle weight|lightweight car]]. Main deficit is the bore diameter limits valve size. * 307 CI: Effectively a large-journal 327 crank with a 283 bore size. Limited performance potential. * 327 CI: Considered a good engine for higher RPM hp, can be built for street performance. * 334 CI: 305 block with 400 crank. Most practical where emissions require specific engine/vehicle combinations (like CA). * 350 CI: America's most popular SBC. Not much needs to be said, they fit most budgets and expectations, great all around engine. Mid-1980s onward have a 5.7L embossed on the bellhousing lip. * 353 CI: 400 block with 327 crank. * 377 CI: This is a 400 block with a 350 crank and either custom crankshaft, or factory spec main journal crank using special bearings or bearing spacers. * 383 CI: 350 block with a 3.75 crank. Popular performance combination. Initially required external balancing but internal balance cranks are common today. * 400 CI: Stock cranks are external balanced, crank manufacturers are currently producing internal balanced cranks. The original standard bore and stroke for each: * 262 CI: 3.671" x 3.100" * 265 CI: 3.750" x 3.000" * 267 CI: 3.500" x 3.480" * 283 CI: 3.875" x 3.000" * 302 CI: 4.000" x 3.000" * 305 CI: 3.736" x 3.480" * 307 CI: 3.875" x 3.250" * 327 CI: 4.000" x 3.250" * 350 CI: 4.000" x 3.480" * 400 CI: 4.125" x 3.750" ==Related articles== *[[Why not to use a small-block Chevy engine]] *[[The controversial Chevy small block engine]] [[Category:Engine]] [[Category:GM]]

| Editing help (opens in new window)