Editing Torque converter lock up control 700R4

{{youcanedit}}


When the brakes are applied the relay switches to pin 87 and the circuit is broken, thus opening the trans feed.


Common type  Bosch relay used



[[Image:Diagram_no_tow.jpg]]


[[image:700_connectors.jpg]]


Solenoid designs:  1 wire and common 2 wire

[[image:700_solenoid_wires.jpg]]

Location for pressure switch on valve body for 4th gear lockup only of the converter clutch

[[Image:700_v-body_switch.jpg]]



[[Category:Transmission]]
[[Category:Good articles]]