Editing Transmission holding fixtures

=Fixtures to hold  automatic transmission for rebuild, inspection, storage.=

===GM transmissions===


A very simple method of using a plastic 5 gallon bucket with a flexplate on top.

[[file:Trans_holding_bucket01.jpg]]

Set the transmission case on top of the flexplate.


[[file:Trans_holding_bucket02.jpg]]


Photo shows a powerglide on a fixture that has pegs to slide into the hole for engine dowel pins.

[[file:GM_trans_holder.jpg]]


This fixture can be attached to a bench or engine stand device. This design allows the trans case to be rotated during the reassembly process. Take care to make sure the bench or engine stand is stable enough to hold the weight as the trans is rotated

[[file:GM_trans_holder02.jpg]]


===Ford automatics===

C-4 trans sits on a broken Mopar case  for assembly

[[file:C4_trans_build.jpg]]

[[category: Transmission]]