Editing Sandblasting

{{youcanedit}} The term "sandblasting" is confusing, as, in its most specific interpretation, it means [[Media blasting|abrasive blasting]] using sand as the blasting medium. More commonly, "sandblasting" is used to refer to [[Media blasting|abrasive blasting]] using any blasting medium. This is somewhat of a misnomer, as sand is frequently a poor choice for a blasting medium. ==Sandblasting body panels is generally ill-advised== Sandblasting automotive body panels, using sand as the blasting medium, is not recommended, for the following reasons: *Sandblasting '''impinges''' sheet metal. *Prolonged sand blasting of thin sheet metal causes frictional heat that may warp metal. (''disputed; needs confirmation'') *Sand creates chloride ions and corrosive salts that promote [[rust]]. ''(this statement needs confirmation/expansion)'' ==References== *[http://www.hotrodders.com/forum/once-all-wiki-soda-blasting-162700.html Once and for all: wiki on Soda blasting] Hotrodders forum thread ==Resources== *[http://www.hotrodders.com/kb/media-blasting Media Blasting]Hotrodders Knowledge Base ;Crankcase Coalition article *[[Media blasting]] *[[Soda blasting]] [[Category:Body and exterior]] [[Category:Garage and shop]] {{develop1}} [[Category:Undeveloped articles]]

| Editing help (opens in new window)