Editing Removing a 60's Ford headlight switch

{{develop1}}
The '60s ford headlight switch is retained to the instrument panel with a special bezel nut.  
*First pull the headlight switch knob out to the headlight "ON" position. 
*Reach up around the instrument panel to the switch opposite where the wire harness connects. There is a release button about the size of a pencil eraser. 
*Push it in and wiggle the switch knob in and out to get it to release. 
*Then pull the knob shaft all the way out.  
*The retaining nut has either 2 or 4 recesses like a Philips screw. Usually a flat blade screw driver the right width will work to unscrew the nut. 
*Unclip the harness and install your new switch with the special bezel nut. 
*When you reinstall the knob shaft YOU MUST PUSH IN THE RELEASE BUTTON. If you just jam it in, you will break the ceramic dash light dimmer pieces.

[[Category:Undeveloped Electrical articles]]
[[Category:Undeveloped articles]]
[[Category:Electrical]]
[[Category:Ford]]