Editing How to identify a Ford V8

'''How to identify a Ford V8'''


== 335 Series Engine Family (Cleveland) (351C/351M/400) ==


8 cap screws retain rocker cover. 

Timing chain housing is part of block casting. 

Thermostat housing on block.

Fuel pump mounting bolts are vertical. 

Exhaust bolt holes diagonal.

351M/400: Intake is 12.7" wide the 351C is narrower (Differing Deck Heights).

It is difficult to differentiate 351M from a 400 externally. The most accurate way is to remove the oil pan and look at the crank.

400 Crankshaft ID. http://www.tmeyerinc.com/400crankshaftid.html

== Ninety-Degree Engine Family Series (221/260/289/302/255/351W) ==

6 cap screws retain rocker covers. 

Thermostat housing on intake manifold. 

Exhaust bolt holes horizontal.

302 BOSS Engines (69/70) have Cleveland (335 Series) style (canted valves) heads and the block can be identified by screw-in freeze plugs.

== 385 Series (Lima) -- (429/429BOSS/460/370 Truck) ==

7 Retaining cap screws in rocker cover

== FE Series (332/352/361/360/390/410/427/427SOHC/428) == 

FE (FORD-EDSEL) Engine Family: 

Intake manifold runners partially covered by rocker covers.

== FORD Y-Block (239/256/272/292/312) ==

Rear mount distributor

2 Studs (and retaining nuts) retain rocker cover

Intake runners are over and under- Center exhaust ports are close together (similar to a SBC)

Exhaust manifold bolts are in a common plane (line) across the cylinder head exhaust surface, if they are staggered it is a Lincoln Y-Block (317/341/368 Pass. Car) (279/317/302/332 Heavy Truck)