Editing How to remove a starter

'''How to remove a starter on a 1990-199? Chevy Blazer, S10, Bravada, ect. with 4.3L engine'''

'''Tools need:'''
8mm wrench

8mm or 5/16,13mm,14mm,15mm (3/8 drive sockets)1/4 drive 11mm deep socket

extensions

1/4in and 3/8in drive ratchet, if bolts are tight use breaker bar.

jack and jackstands

lug wrench/3/4 socket with 1/2in drive breaker bar

'''INSTRUCTIONS:'''

1. Remove the negative battery cable( use 8mm socket or wrench, and jack up the truck/suv.

2.Remove wheel and disconnect Battery cable, and  'S' terminal, with 13mm and 8mm sockets, the 'S' termninal nut is easy to remove
using a fine tooth ratchet.

3. Remove and support the starter, for better access remove the torque converter cover, ( 4 bolts, and the transmission line bolted to the engine oil pan with a 11mm socket

4 Remove the starter, and install the rebuilt/new starter, and do put everything you removed to get to the stater