Editing Vacuum brake bleeder set up

What you need:
-Vacuum pump
-Glass jar with lid
-Clear tubing
-Brass fittings
-All this should cost around $20

'''Vacuum Pump'''
You can get inexpensive venturi (need an air compressor to operate) vacuum pumps made for AC work from Harbor Freight.  The one I have is just like the first link but is red and had a R12 fitting on it.  The vacuum fitting is 1/8-NPT on the other side.
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=92475
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96677

'''Glass Jar'''
I used an old spaghetti sauce jar, drilled some holes in the lid and put some brass fittings in it.  I needed to use washers to get a tight seal.

[[Image:http://www.thesocalbigdawgs.com/vb/gallery2/main.php/d/8156-2/IMG_0491.JPG]]

[[Image:http://www.thesocalbigdawgs.com/vb/gallery2/main.php/d/8159-2/IMG_0492.JPG]]

[[Image:http://www.thesocalbigdawgs.com/vb/gallery2/main.php/d/8153-2/IMG_0490.JPG]]