Editing Body and exterior tips

{{youcanedit}} http://richinnyd.justfree.com/nursing4782.html why bankruptcy law http://richinnyd.clamphost.com/nursing5297.html online nursing research course http://deniseramos.aokhost.com/nursing402.html online psychology masters degrees http://catherinegossett.freehostplace.com/nursing7397.html california state university online degre http://bettyoneal.seitenclique.net/nursing7715.html bankruptcy code student loan http://richinnyd.hostaim.com/nursing3967.html nursing home emergency preparedness http://chadmiller.hostedwith.us/nursing1265.html ultima online product registration code http://richinnyd.hostevo.com/nursing9775.html distant learning program general educati http://deniseparker.justfree.com/nursing6167.html nursing school memphis tn http://terryweir.yoyohost.com/nursing5571.html degree dietetics online http://richinnyd.sitebooth.com/nursing517.html black gambling jack lasvegascasinomania http://richinnyd.sitebooth.com/nursing2073.html louisiana nursing home without consent http://richinnyd.domaingler.com/nursing1487.html college nursing silliman university http://kevinreed.hostedwith.us/nursing1876.html alabama license nursing http://richinnyd.aokhost.com/nursing1411.html utmb school of nursing http://richinnyd.hothostcity.com/nursing5189.html memphis nursing university http://richinnyd.yourfreehosting.net/nursing7643.html gracedale private nursing home ringwood http://ramonestes.freehostingz.com/nursing6355.html masters degree business real estate onli http://autumnbeck.yourfreehosting.net/nursing5442.html electronic informatics nursing record http://richinnyd.hothostcity.com/nursing6768.html nursing profession philosophy Great site, http://eliserogers.00bp.com/avatar8232.html avatar, 970796, http://garybengtson.domaingler.com/avatar1231.html avatar, %O, http://richinnyd.domaingler.com/avatar1079.html avatar, ynedp, http://richinnyd.aokhost.com/avatar894.html avatar, 1741, http://richinnyd.hostinggratisargentina.com/avatar4210.html avatar, qpqvpm, http://catherinegossett.freehostplace.com/avatar7879.html avatar, crwcv, http://deniseramos.aokhost.com/avatar9866.html more info, 305, http://richinnyd.k2free.com/avatar3415.html avatar, 1494, http://kevinreed.hostedwith.us/avatar184.html avatar, >:-(((, http://richinnyd.hostinggratisargentina.com/avatar6185.html more info, qgafo, Hi, http://evelyndock.phreesite.com/avatar5881.html more info, 40273, ==Taping and masking== *When painting up to a rubber gasket (like a windshield), place a length of rubber vacuum line, plastic tubing, clothesline, or weed trimming string under the gasket. When the paint is dry, pull the line out. It will look like the gasket was removed for painting. Even if it shrinks over time, it won't expose old color. If the gasket won't lay back down, use a heat gun (after the paint has fully cured). 3M makes a product called "trim masking tape" that can also be used for this purpose. *Before applying clearcoat, re-mask windows and other body parts with fresh paper (taping over the existing paper is fine). This will prevent dust from previous coats from contaminating the clearcoat. *Use aluminum foil for masking odd shapes. *Tape down loose masking paper. It can move around while painting, and dirt can hide in the creases. *When taping off a large opening (such as a door) first run several lines of tape across it (sticky side out). Now, when it's masked, the paper will stick to the tape and it won't be so floppy. *Use garbage bags to mask wheels. They can be cut or stretched to cover a wheel. When done painting, the masking material can be disposed of in the garbage bags. *When taping off a two-tone, use specific taping and and painting guidelines. For more information, see Brian Martin's article posted on the Hotrodders Bulletin Board: [http://www.hotrodders.com/forum/tip-day-15-a-71220.html Taping off a two tone paint job]. *Removing a part is often a better option than masking it. *When taping a curve, tape will stretch better one way than the other. *When removing tape from freshly painted sheetmetal, do it as soon as possible. *Remove tape in a slightly outward and downwards motion. This will allow the tape to roll back on itself, preventing jagged edges and lifting. *To get tape to stick to rubber, wipe the rubber clean with thinner. *To prevent tape marks when taping on fresh paint, try applying the tape to your pants first. It won't stick as much with a thin layer of lint. this allows air under the tape so you don't trap solevent evaporation which causes paint to show tape shadowing or marring. ==Body filler== *For body lines and peaks on hoods or doors, use a contour gauge to make a custom plastic filler spreader: #Place the contour gauge on an undamaged area to get the contour. #Trace the contour onto a plastic body filler spreader. #Trim out the shape on the spreader. *Cut filler spreaders to the desired size. *To clean body filler spreaders, use 1/4 of a 3M scuff pad with lacquer thinner on it. A metal quart can with a lid makes a safe way to store the scuff pad along with some lacquer thinner. *For reproducing small parts such as gaskets, use plastic body filler to make a mold: #If the part doesn't already exist, a replica has to be made in its shape (for example, carve it out of soft plastic). #Apply some wax to the part (this will act as a mold release), and lay it down on a piece of wax paper. #Mix up some body filler, and place it in a small cup or bowl (the cap on a plastic jug may work). #While the filler is still wet, place it over the part. #When the filler hardens, it can be removed and used as a mold. *When applying body filler upside down, apply the filler to a sheet of thin plastic (such as the side of a milk jug) and press it into place. When the filler hardens, peel the plastic away. *use an aluminum ruler to find high and low spots such as doors..hood to fender..or trunk lid to fender ect.. &if using filler with hatonite you can sand filler while still tacky this will shread the filler smooth easily with hardly any pressure,when finished follow up with a poyester glase or add filler thinner to your finale coat of filler. ==Cleanliness== *Use only lint-free towels for cleanup. *Use clean cotton gloves for handling clean panels. Keep them stored clean, and wash when necessary. *Don't leave a roll of tape on its side on any surface that's about to be painted. The adhesive on the tape will leave a residue. *To keep your paint booth dust-free: **Seal concrete floors with white epoxy. Concrete can break down and turn to dust. **Put some linseed oil in a spray bottle, and mist any intake filters to catch dust. **Clean any overhead sprinklers before and after each paint job. Or place sandwich bags over them. **Try to eliminate vibrations from fans. *To clean panels between compound, polish, glaze, etc., use a 50/50 mixture of water and rubbing alcohol in a spray bottle. Panels can also be cleaned with wax and grease remover. *Don't use sprayable products in the immediate area prior to or following a paint job, for at least 24 hours. Products in the air could contaminate your paint job. ==Assembly and disassembly== *Use proper techniques for removing old or rusted bolts. See [[Removing rusted and broken fasteners]]. *To protect painted bolts, place a sandwich bag over the bolt head before pushing on the socket. *When aligning a body part that will require a lot of loosening and tightening, use mock-up bolts with plastic washers. When the panel fit is perfect, go back and change out the bolts one by one. *When disassembling parts or vehicles, be organized. Plastic bags, tape, and a magic marker are essential. **Write notes on a piece of tape, and stick the piece of tape to a part. **Put small parts, nuts, bolts, clips, etc. in bags together for each assembly. Mark each bag. **Tape nuts and bolts into their holes, or tape them to their part. Write notes on the tape. *Socket sets with plastic inserts may be useful for protecting bolt heads. However, they are reported to strip out easily. *Use a squirt can for dispensing small amounts of lacquer thinner. *When hanging panels by yourself, use proper balancing and alignment techniques. For more information, see this discussion from the Hotrodders Bulletin Board: [http://hotrodders.com/forum/tip-day-40-hanging-panels-yourself-77875.html Hanging panels by yourself]. *To protect edges or corners during panel installation, use vacuum line or fuel line hose. Cut it down the middle, and tape it on. *To hold nuts in a socket while assembling hard-to-reach body and exterior components, use masking tape stuffed in the socket -- sticky side out. Similarly, bearing grease can be placed on a washer to hold it to a socket for re-assembling parts. *When disassembling small hard-to-reach parts, use grease in the socket to prevent losing fasteners. *Use caution when installing hood springs. For more information, and a diagram, see Brian Martin's article posted on the Hotrodders Bulletin Board: [http://www.hotrodders.com/forum/tip-day-28-hood-spring-installation-74269.html Hood spring installation]. *For precise application of penetrating oil, put the oil in a hand spray bottle, and set the nozzle to a stream. This technique also prevents the release of fisheye causing aerosols into the air. *For drilling out hard-to-reach spot welds, certain drill attachments (like paint stirring tools) may be able to be modified to work as extensions. ==Miscellaneous== *To paint rims without scratching them: #Mount the tire on the rim, but don't fill it up with air. #Mask the tire with paper, stuffing it in between the tire and the rim. #Paint the rim. You can paint around the back edge of the rim, along with the rest of it. #Remove the masking and inflate the tire. It will look like the tire was off the rim when it was painted. *To clean foam buffing pads while using them, use a cheap paint brush with the bristles cut off about halfway for stiffness. *Allow plenty of air circulation around your air compressor. Put it outside if possible, or point a fan at it. *Make paper templates for easy cutting and drilling. For more information and photos, see Brian Martin's article posted on the Hotrodders Bulletin Board: [http://www.hotrodders.com/forum/tip-day-13-a-71092.html Templates for accurate cutting and drilling]. *Before installing weld-on parts (core supports, quarter panels, rear panels, etc.), scuff the inside areas. It's easier to do this before parts are installed. *For doing small touchups without ending up with a huge repair area from sanding, cut sanding discs down to size. *To remove creases and dents from plastic bumpers, heat them with a heat gun, and work the area while it's hot. A wallpaper seam roller can be used to work dents out from the back side of the bumper, and a window screen bead installer can be used to push creases down from the front. Flex filler can be used for finishing. *When chemical stripping parts with heavy buildup: #Coat the panel heavily with stripper. #Cover with a cheap plastic drop cloth, or plastic wrap. #Let it stay covered at least an hour, but as long as overnight. #The stripper penetrates deeper when it won't dry out, and the plastic wrap makes it easier to remove. *If you want an entire part painted, finish it before installing it. Then, touch it up after it's been welded on. Although, this has been argued to be inefficient on a production basis, especially for parts that are not visible, and have been e-coated for adequate protection. *Be creative when sourcing patch metal. Potential sources include: **old refrigerators **old air conditioning units **old computer cases **fenders, roofs, or other body parts from vehicles *Use florescent "drop" lights, rather than incandescent. They create less heat, last longer, and are more resistant to shocks than incandescent bulbs. *Save old magnets that are being thrown away (from old car speakers, or refrigerator/freezer sealing strips, computer hard drives, etc.). They have many uses: #Place magnets over masking material to keep from blowing around. #Use magnets to hold fire blankets in place while welding. #Use a magnet in a plastic bag to pick up nails and screws. When done, turn the bag inside out; the metal parts are in the bag, and the magnet stays clean. #Put large magnets along the outside of a tool box, and tools can be suspended from the inside of the box. *Oil filter shells can be used for making recessed tail lights. They come in many different sizes, and the larger ones for commercial trucks may be especially useful. *To make a custom body grommet, use a section of vacuum hose that's been split down the middle with a razor or similar tool. A photo of this can be seen here: [http://hotrodders.com/gallery/showphoto.php/photo/17678/size/big/cat/500/page/ Hotrodders Photo Gallery]. *To pull weld studs easier than the pullers can that come with the cheap weld stud guns, weld a pair of vicegrips to a regular dent puller. They can be tack welded to a screw-on accessory and used as a new attachment. ==Questionable or disputed tips== These are tips that have been posted, either in this article or around the web, that may be disputed or otherwise questionable. *Modify a regular caulk gun to make a dual-cartridge caulk gun. More information and photos on this can be found in this [http://www.hotrodders.com/forum/tip-day-20-a-71736.html Hotrodders Bulletin Board discussion]. ''This tip was cautioned against because of potential problems with the accuracy of the mix ratio, and because dual-cartridge guns are not particularly expensive.'' *When applying body filler upside down, mix glue in with it to prevent it from falling. ''This tip was cautioned against due to concerns about potential chemical effects from mixing glue in with body filler. Instead, using a thicker brand of filler is recommended.'' ==History== This wiki article was written to compile the various "Tips of the Day" posted in the [http://www.hotrodders.com/forum/body-exterior Body-Exterior forum] on the Hotrodders Bulletin Board. The tradition of posting a "Tip of the Day" started with member jcclark, who posted the first Tip of the Day on August 26, 2005: [http://www.hotrodders.com/forum/tip-day-68901.html Displace the air inside cans of hardener]. jcclark went on to post the next two tips, after which other members continued the tradition. Member MARTINSR also made considerable contributions to the Tips of the Day. While termed "Tip of the Day", the tips weren't actually posted on a daily basis. For the first 50 tips, a tip was posted, on average, once every 6 days. On December 24th, 2005, after the 35th tip had been posted, the administrator of the Hotrodders Bulletin Board compiled all of the Tips of the Day into one post: [http://www.hotrodders.com/forum/body-exterior-tips-day-76946.html Body-exterior tips of the day]. On July 14, 2006, after the 53rd Tip of the Day was posted, this wiki article was made. Hopefully, all future tips will be added to the wiki article. Additionally, [http://www.roddingroundtable.com/tech/articles/sanding2.html Body Working Tips] by Carl Brunson, and [http://www.roddingroundtable.com/tech/articles/sanding2.html Sanding] from ''Wikipedia'' were used as references and sources for body working tips. ==References== #[http://www.hotrodders.com/forum/body-exterior-tips-day-76946.html Body-exterior tips of the day], ''Hotrodders Bulletin Board'', December 24, 2005. #[http://www.hotrodders.com/forum/tip-day-68901.html Tip of the day #1], ''Hotrodders Bulletin Board'', August 26, 2005. #[http://www.hotrodders.com/forum/tip-day-2-a-69242.html Tip of the day #2], ''Hotrodders Bulletin Board'', August 31, 2005. #[http://www.hotrodders.com/forum/tip-day-3-a-69594.html Tip of the day #3], ''Hotrodders Bulletin Board'', September 6, 2005. #[http://www.hotrodders.com/forum/tip-day-5-a-69830.html Tip of the day #5], ''Hotrodders Bulletin Board'', September 9, 2005. #[http://www.hotrodders.com/forum/tip-day-7-a-70195.html Tip of the day #7], ''Hotrodders Bulletin Board'', September 15, 2005. #[http://www.hotrodders.com/forum/tip-day-8-a-70233.html Tip of the day #8], ''Hotrodders Bulletin Board'', September 15, 2005. #[http://www.hotrodders.com/forum/tip-day-10-a-70323.html Tip of the day #10], ''Hotrodders Bulletin Board'', September 17, 2005. #[http://www.hotrodders.com/forum/tip-day-11-a-70436.html Tip of the day #11], ''Hotrodders Bulletin Board'', September 19, 2005. #[http://www.hotrodders.com/forum/tip-day-12-cans-71087.html Tip of the day #12], ''Hotrodders Bulletin Board'', September 29, 2005. #[http://www.hotrodders.com/forum/tip-day-13-a-71092.html Tip of the day #13], ''Hotrodders Bulletin Board'', September 29, 2005. #[http://www.hotrodders.com/forum/tip-day-13-999-ahh-heck-lets-just-make-14-a-71163.html Tip of the day #14], ''Hotrodders Bulletin Board'', September 30, 2005. #[http://www.hotrodders.com/forum/tip-day-15-a-71220.html Tip of the day #15], ''Hotrodders Bulletin Board'', October 1, 2005. #[http://www.hotrodders.com/forum/tip-day-16-a-71240.html Tip of the day #16], ''Hotrodders Bulletin Board'', October 1, 2005. #[http://www.hotrodders.com/forum/tip-day-17-a-71305.html Tip of the day #17], ''Hotrodders Bulletin Board'', October 2, 2005. #[http://www.hotrodders.com/forum/tip-day-18-a-71400.html Tip of the day #18], ''Hotrodders Bulletin Board'', October 4, 2005. #[http://www.hotrodders.com/forum/tip-day-19-a-71689.html Tip of the day #19], ''Hotrodders Bulletin Board'', October 8, 2005. #[http://www.hotrodders.com/forum/tip-day-20-a-71736.html Tip of the day #20], ''Hotrodders Bulletin Board'', October 9, 2005. #[http://www.hotrodders.com/forum/tip-day-22-a-72379.html Tip of the day #22], ''Hotrodders Bulletin Board'', October 19, 2005. #[http://www.hotrodders.com/forum/tip-day-72640.html Tip of the day #22-2], ''Hotrodders Bulletin Board'', October 23, 2005. #[http://www.hotrodders.com/forum/tip-day-23-a-72767.html Tip of the day #23], ''Hotrodders Bulletin Board'', October 25, 2005. #[http://www.hotrodders.com/forum/tip-day-24-a-72997.html Tip of the day #24], ''Hotrodders Bulletin Board'', October 28, 2005. #[http://www.hotrodders.com/forum/tip-day-25-a-73015.html Tip of the day #25], ''Hotrodders Bulletin Board'', October 29, 2005. #[http://www.hotrodders.com/forum/tip-day-25-a-73355.html Tip of the day #25-2], ''Hotrodders Bulletin Board'', November 3, 2005. #[http://www.hotrodders.com/forum/tip-day-26-a-73037.html Tip of the day #26], ''Hotrodders Bulletin Board'', October 29, 2005 #[http://www.hotrodders.com/forum/tip-day-oil-filters-73069.html Tip of the day #26-2], ''Hotrodders Bulletin Board'', October 29, 2005. #[http://www.hotrodders.com/forum/tip-day-27-a-73697.html Tip of the day #27], ''Hotrodders Bulletin Board'', November 9, 2005. #[http://www.hotrodders.com/forum/tip-day-30-a-74674.html Tip of the day #30], ''Hotrodders Bulletin Board'', November 24, 2005. #[http://www.hotrodders.com/forum/tip-day-31-a-74919.html Tip of the day #31], ''Hotrodders Bulletin Board'', November 28, 2005. #[http://www.hotrodders.com/forum/tip-day-32-a-75712.html Tip of the day #32], ''Hotrodders Bulletin Board'', December 8, 2005. #[http://www.hotrodders.com/forum/tip-day-35-a-76820.html Tip of the day #35], ''Hotrodders Bulletin Board'', December 22, 2005. #[http://hotrodders.com/forum/tip-day-36-a-77027.html Tip of the day #36], ''Hotrodders Bulletin Board'', December 26, 2005. #[http://hotrodders.com/forum/tip-day-37-a-77571.html Tip of the day #37], ''Hotrodders Bulletin Board'', December 31, 2005. #[http://hotrodders.com/forum/tip-day-38-a-77624.html Tip of the day #38], ''Hotrodders Bulletin Board'', January 1, 2006. #[http://hotrodders.com/forum/tip-day-39-a-77854.html Tip of the day #39], ''Hotrodders Bulletin Board'', January 4, 2006. #[http://hotrodders.com/forum/tip-day-40-hanging-panels-yourself-77875.html Tip of the day #40], ''Hotrodders Bulletin Board'', January 4, 2006. #[http://hotrodders.com/forum/tip-day-41-a-78309.html Tip of the day #41], ''Hotrodders Bulletin Board'', January 9, 2006. #[http://hotrodders.com/forum/tip-day-42-a-80655.html Tip of the day #42], ''Hotrodders Bulletin Board'', February 3, 2006. #[http://hotrodders.com/forum/tip-day-43-a-82554.html Tip of the day #43], ''Hotrodders Bulletin Board'', February 24, 2006. #[http://hotrodders.com/forum/tip-day-43-a-82941.html Tip of the day #43-2], ''Hotrodders Bulletin Board'', February 28, 2006. #[http://hotrodders.com/forum/tip-day-44-a-83301.html Tip of the day #44], ''Hotrodders Bulletin Board'', March 4, 2006. #[http://hotrodders.com/forum/tip-day-46-a-84650.html Tip of the day #46], ''Hotrodders Bulletin Board'', March 19, 2006. #[http://hotrodders.com/forum/tip-day-47-a-84860.html Tip of the day #47], ''Hotrodders Bulletin Board'', March 21, 2006. #[http://hotrodders.com/forum/tip-day-number-47-a-87025.html Tip of the day #47-2], ''Hotrodders Bulletin Board'', April 15, 2006. #[http://hotrodders.com/forum/tip-day-48-a-88602.html Tip of the day #48], ''Hotrodders Bulletin Board'', May 5, 2006. #[http://hotrodders.com/forum/tip-day-49-a-88627.html Tip of the day #49], ''Hotrodders Bulletin Board'', May 5, 2006. #[http://hotrodders.com/forum/tip-day-49-a-89106.html Tip of the day #49-2], ''Hotrodders Bulletin Board'', May 11, 2006. #[http://hotrodders.com/forum/tip-dy-50-a-89605.html Tip of the day #50], ''Hotrodders Bulletin Board'', May 17, 2006. #[http://hotrodders.com/forum/tip-day-51-a-90442.html Tip of the day #51], ''Hotrodders Bulletin Board'', May 28, 2006. #[http://hotrodders.com/forum/tip-day-52-a-91115.html Tip of the day #52], ''Hotrodders Bulletin Board'', June 6, 2006. #[http://hotrodders.com/forum/tip-day-53-a-93637.html Tip of the day #53], ''Hotrodders Bulletin Board'', July 13, 2006. #[http://www.roddingroundtable.com/tech/articles/sanding2.html Body Working Tips], by Carl Brunson, ''RoddingRoundtable.com'', retrieved July 14, 2006. #[http://hotrodders.com/kb/body-exterior/articles/removing_tape.html Removing Tape after a Paint Job], by Halloweenking, ''Hotrodders Knowledge Base'', retrieved July 16, 2006. #[http://hotrodders.com/kb/body-exterior/articles/painting_donts.html Painting Dont's], by Halloweenking, ''Hotrodders Knowledge Base'', retrieved July 16, 2006. #[http://en.wikipedia.org/wiki/Sandpaper Sandpaper], ''Wikipedia'', retrieved July 14, 2006. [[Category:Body and exterior]] {{youcanedit}}

| Editing help (opens in new window)

• Template:Needspics (edit)
• Template:Rounded (edit)
• Template:Youcanedit (view source)