Editing Different approaches to check your air conditioner for leaks

Proper setup will have no leaks

This refrigerant is in a covered system which needs to never have to be replaced or reenergized. When a proper installing of an air conditioner is performed the air conditioning specialist should look for any kind of leakages by a vacuum pump. , if there is a leak in the system it requires to be found and fixed before the mount is comprehensive and freon is added to the device.. Occasionally throughout the setup procedure either an individual had a bad weld or really did not put a vacuum pump just before billing the system with freon. If it is a sluggish leak you wouldn't record it till its far too late. 
Ways to identify the leak after system has actually been mounted
A) Refrigerant Leak Detector which senses a leak. A beep sound will certainly be heard when it touches the copper water pipes.
B) Injecting Dye which spots a leak by placing a tinted dye into the copper pipe and the shade will certainly show where the leak is.
C) Soap and Water. Bubbles will certainly form when the soap and water is placed on the leak site.
Each method explained over has its cons and pros, this shouldn't be done on your own but should be done by a professional. call a professional by visiting this website http://airconditioningorangecounty.wordpress.com/
Brazing after leak detection
Brazing is a procedure in which 2 or additional steel products are collaborated by filling up the leak and brazing area with a filler metal.
In the methods and equipment mention over, taking care of the leak may appear easy. Freon leakages are exceptionally challenging to detect and seal. Especially if the leak source is in the coils situated outside or inside, it is nearly impossible to identify the leak as it is concealed inside the wall surface. A seasoned [http://airconditioningorangecounty.wordpress.com/ orange county air conditioning repair] specialist ought to discover the leak immediately.