How to rebuild an engine
m (Reverted edits by 153.107.192.207 (talk) to last revision by Cobalt327) |
(→Tools) |
||
| Line 3: | Line 3: | ||
===Tools=== | ===Tools=== | ||
| − | You will need | + | You will need a basic set of hand tools, such as a good variety of boxed end wrenches, ratchet and socket set, screwdriver set, and a gasket scraper. This basic set of tools will get you through the majority of the disassembly steps. |
You will need a few special tools when it comes time to build or reassemble the engine. A good torque wrench, [http://www.plastigaugeusa.com Plastigauge], and a cam bearing installing tool (or have the machine shop install the cam bearings). Also, you may need a ridge reamer, a ring groove cleaner (a piece of a broken ring can be carefully used for this), a ring expander, a ring trimmer, a ring compressor, and a good cylinder hone. If cylinder head work is going to be done, a spring compressor will be needed. | You will need a few special tools when it comes time to build or reassemble the engine. A good torque wrench, [http://www.plastigaugeusa.com Plastigauge], and a cam bearing installing tool (or have the machine shop install the cam bearings). Also, you may need a ridge reamer, a ring groove cleaner (a piece of a broken ring can be carefully used for this), a ring expander, a ring trimmer, a ring compressor, and a good cylinder hone. If cylinder head work is going to be done, a spring compressor will be needed. | ||
Your Privacy Choices