Hot rodding the HEI distributor
(→Coil) |
(→Coil) |
||
| Line 157: | Line 157: | ||
*Set your DVOM scale to RX10K or higher. | *Set your DVOM scale to RX10K or higher. | ||
*Put the probes between the Ground terminal of the coil and the carbon pickup inside the distributor cap. It should read between 6000Ω and 30,000Ω. Outside of that range toss the coil and get a new one. | *Put the probes between the Ground terminal of the coil and the carbon pickup inside the distributor cap. It should read between 6000Ω and 30,000Ω. Outside of that range toss the coil and get a new one. | ||
| − | Test carbon pickup- resistance will be 4000- 6000 ohms | + | Test carbon pickup between carbon end and spring end - resistance will be 4000- 6000 ohms |
[[File:HEI cap.jpg]] | [[File:HEI cap.jpg]] | ||
Your Privacy Choices