General Motors transmissions
Foperfoauto (Talk | contribs) (→ST-300) |
(→ST-300) |
||
| Line 1,462: | Line 1,462: | ||
One positive method to identify this transmission is to notice the fluid port on the stator support shaft. The proper matching Torque Converter will have the corresponding bushings inside the Torque Converter that creates the fluid channel. This fluid channel allows the pressurized transmission fluid to change the pitch of the vanes. | One positive method to identify this transmission is to notice the fluid port on the stator support shaft. The proper matching Torque Converter will have the corresponding bushings inside the Torque Converter that creates the fluid channel. This fluid channel allows the pressurized transmission fluid to change the pitch of the vanes. | ||
| − | [[File: | + | [[File:-ST300 Drv Side 1.jpg|frame|left|ST300 left side view shows the electrical connector near the rear of the transmission, that also depicts this as a switch pitch style of transmission.]] |
| − | [[File: | + | [[File:-ST300 Input Shaft2.jpg|frame|right|ST300 input shaft, open port seen on the stator support passes the pressurized transmission fluid to the torque converter and causes the vanes to change pitch at operating speed.]]<br style="clear: both" /> [[File:ST300_TQ_Converter_Pic_1.jpg|frame|left|On the outside of this Torque Converter there are no tell tale signs to depict this converter as a switch pitch style converter. Some converters will have small welded bumps on the outside, yet in this case, this converter does not. ]] [[File:-ST300 TQ Converter Pic 3B.jpg|frame|center|By looking into this converter, you can see the set of narrow bushings that ride upon the stator support that creates a fluid channel that is a pass-through for the pressurized fluid needed to change the pitch of the Torque Converter vanes.]] |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | On the outside of this Torque Converter there are no tell tale signs to depict this converter as a switch pitch style converter. Some converters will have small welded bumps on the outside, yet in this case, this converter does not. | + | |
===Torque-Drive=== | ===Torque-Drive=== | ||
Your Privacy Choices