General Motors transmissions

Jump to: navigation, search
(ST-300)
(ST-300)
Line 1,463: Line 1,463:
 
   
 
   
 
[[File:-ST300 Drv Side 1.jpg|frame|left|ST300 left side view shows the electrical connector near the rear of the transmission, that also depicts this as a switch pitch style of transmission.]]   
 
[[File:-ST300 Drv Side 1.jpg|frame|left|ST300 left side view shows the electrical connector near the rear of the transmission, that also depicts this as a switch pitch style of transmission.]]   
[[File:-ST300 Input Shaft2.jpg|frame|right|ST300 input shaft, open port seen on the stator support passes the pressurized transmission fluid to the torque converter and causes the vanes to change pitch at operating speed.]]<br style="clear: both" />  [[File:ST300_TQ_Converter_Pic_1.jpg|frame|left|On the outside of this Torque Converter there are no tell tale signs to depict this converter as a switch pitch style converter.  Some converters will have small welded bumps on the outside, yet in this case, this converter does not. ]]  [[File:-ST300 TQ Converter Pic 3B.jpg|frame|center|By looking into this converter, you can see the set of narrow bushings that ride upon the stator support that creates a fluid channel that is a pass-through for the pressurized fluid needed to change the pitch of the Torque Converter vanes.]]
+
[[File:-ST300 Input Shaft2.jpg|frame|right|ST300 input shaft, open port seen on the stator support passes the pressurized transmission fluid to the torque converter and causes the vanes to change pitch at operating speed.]]<br style="clear: both" />  [[File:ST300_TQ_Converter_Pic_1.jpg|frame|left|On the outside of this Torque Converter there are no tell tale signs to depict this converter as a switch pitch style converter.  Some converters will have small welded bumps on the outside, yet in this case, this converter does not. ]]  [[File:-ST300 TQ Converter Pic 3B.jpg|frame|center|By looking into this converter, you can see the set of narrow bushings that ride upon the stator support that creates a fluid channel that is a pass-through for the pressurized fluid needed to change the pitch of the torque converter vanes.]]
  
 
===Torque-Drive===
 
===Torque-Drive===

Revision as of 01:12, 18 October 2016

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox