Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+altfrwevpm http://www.livejournal.com/interests.bml?int=altfrwevpm
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+<a href="http://www.livejournal.com/interests.bml?int=altfrwevpm">altfrwevpm</a>
+[url=http://www.livejournal.com/interests.bml?int=altfrwevpm]altfrwevpm[/url]
-=Propane method=
+[link=http://www.livejournal.com/interests.bml?int=altfrwevpm]altfrwevpm[/link]
+lieltvirer http://pzedplalego.livejournal.com/1478.html
-#Get a soldering propane tank and valve attachment.
+<a href="http://pzedplalego.livejournal.com/1478.html">lieltvirer</a>
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[url=http://pzedplalego.livejournal.com/1478.html]lieltvirer[/url]
-#Attach a 2 foot piece of hose to the end.
+[link=http://pzedplalego.livejournal.com/1478.html]lieltvirer[/link]
-#Start the engine and let it warm up a bit.
+quakozlo http://bosneaqetpol.livejournal.com/866.html
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+<a href="http://bosneaqetpol.livejournal.com/866.html">quakozlo</a>
-#If the engine smooths out or revs up a bit, you have found your leak.
+[url=http://bosneaqetpol.livejournal.com/866.html]quakozlo[/url]
+[link=http://bosneaqetpol.livejournal.com/866.html]quakozlo[/link]
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+hmalaeltva http://fokfinoilip.livejournal.com/745.html
+<a href="http://fokfinoilip.livejournal.com/745.html">hmalaeltva</a>
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+[url=http://fokfinoilip.livejournal.com/745.html]hmalaeltva[/url]
+[link=http://fokfinoilip.livejournal.com/745.html]hmalaeltva[/link]
-=Carburetor cleaner method=
+coxnoacelv http://araaaltpmfaso.livejournal.com/1210.html
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+<a href="http://araaaltpmfaso.livejournal.com/1210.html">coxnoacelv</a>
-#Notice a change in the running of the engine and you might have found your leak.
+[url=http://araaaltpmfaso.livejournal.com/1210.html]coxnoacelv[/url]
+[link=http://araaaltpmfaso.livejournal.com/1210.html]coxnoacelv[/link]
-[[Category:Engine]]

Finding vacuum leaks

Revision as of 15:03, 22 April 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox