First paint job
(→General Tips, Tricks, and Techniques) |
(→General Tips, Tricks, and Techniques) |
||
Line 49: | Line 49: | ||
-Buy a set of inexpensive spatulas to use as scrapers for paint cans. | -Buy a set of inexpensive spatulas to use as scrapers for paint cans. | ||
− | -To preserve hardener, displace the air in the can with inert gas, such as the shield gas (CO2/argon, etc.) from a MIG welder (DO NOT USE | + | -To preserve hardener, displace the air in the can with inert gas, such as the shield gas (CO2/argon, etc.) from a MIG welder (DO NOT USE OXYGEN OR ACETYLENE FROM A GAS WELDING UNIT). Or, use a commercial inert gas finish preservative such as Bloxygen. |
-For easier pouring, affix a 2-inch piece of masking tape to the edge of a large gallon of paint. Pour the paint over the piece of tape. | -For easier pouring, affix a 2-inch piece of masking tape to the edge of a large gallon of paint. Pour the paint over the piece of tape. |