Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+australian embassies in africa
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+ http://s1.shard.jp/frhorton/h8s9rb8r9.html
+<a href="http://s1.shard.jp/frhorton/h8s9rb8r9.html">african design form function object traditional
-=Propane method=
+</a>
+[url=http://s1.shard.jp/frhorton/h8s9rb8r9.html]train trips south africa
-#Get a soldering propane tank and valve attachment.
+[/url]
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[link=http://s1.shard.jp/frhorton/h8s9rb8r9.html]africa tribes photos
-#Attach a 2 foot piece of hose to the end.
+[/link]
-#Start the engine and let it warm up a bit.
+consumer rating auto insurance company
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+ http://s1.shard.jp/olharder/prestige-auto.html
-#If the engine smooths out or revs up a bit, you have found your leak.
+<a href="http://s1.shard.jp/olharder/prestige-auto.html">grand theft auto 3 strategy
+</a>
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+[url=http://s1.shard.jp/olharder/prestige-auto.html]midway auto sales
+[/url]
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+[link=http://s1.shard.jp/olharder/prestige-auto.html]autocad rendering tutorial
+[/link]
-Fixing a leak.  My old neighbor built circle track cars and after the ran the engine  he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source.  He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak.  he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
+auto becker radio
+ http://s1.shard.jp/olharder/auto-part-for.html
-=Carburetor cleaner method=
+<a href="http://s1.shard.jp/olharder/auto-part-for.html">aa auto parts
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+</a>
-#Notice a change in the running of the engine and you might have found your leak.
+[url=http://s1.shard.jp/olharder/auto-part-for.html]automotive development industry policy sme smi
+[/url]
-[[Category:Engine]]
+[link=http://s1.shard.jp/olharder/auto-part-for.html]auto invite
+[/link]
+africa songhai
+  http://s1.shard.jp/frhorton/y6gqutu2n.html
+<a href="http://s1.shard.jp/frhorton/y6gqutu2n.html">african cave dwelling pic spider</a>
+[url=http://s1.shard.jp/frhorton/y6gqutu2n.html]african american health woman
+[/url]
+[link=http://s1.shard.jp/frhorton/y6gqutu2n.html]south african politician
+[/link]
+site http://s1.shard.jp/olharder/autoroll-654.html
+<a href="http://s1.shard.jp/olharder/autoroll-654.html">domain</a>
+[url=http://s1.shard.jp/olharder/autoroll-654.html]index[/url]
+[link=http://s1.shard.jp/olharder/autoroll-654.html]http[/link]

Finding vacuum leaks

Revision as of 22:38, 29 May 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox