Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+product to get scratches of of auto glass
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+ http://s1.shard.jp/olharder/comparatif-automobile.html
+<a href="http://s1.shard.jp/olharder/comparatif-automobile.html">auto rv michigan
-=Propane method=
+</a>
+[url=http://s1.shard.jp/olharder/comparatif-automobile.html]grand thefth auto san andreas
-#Get a soldering propane tank and valve attachment.
+[/url]
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[link=http://s1.shard.jp/olharder/comparatif-automobile.html]automotive radio advertising
-#Attach a 2 foot piece of hose to the end.
+[/link]
-#Start the engine and let it warm up a bit.
+ball dresses australia
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+ http://s1.shard.jp/losaul/police-federation.html
-#If the engine smooths out or revs up a bit, you have found your leak.
+<a href="http://s1.shard.jp/losaul/police-federation.html">gove australia map
+</a>
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+[url=http://s1.shard.jp/losaul/police-federation.html]australian public service code of conduct
+[/url]
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+[link=http://s1.shard.jp/losaul/police-federation.html]rams home loan australia
+[/link]
-Fixing a leak.  My old neighbor built circle track cars and after the ran the engine  he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source.  He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak.  he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
+url http://s1.shard.jp/olharder/autoroll-654.html
+<a href="http://s1.shard.jp/olharder/autoroll-654.html">sitemap</a>
-=Carburetor cleaner method=
+[url=http://s1.shard.jp/olharder/autoroll-654.html]http[/url]
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+[link=http://s1.shard.jp/olharder/autoroll-654.html]domain[/link]
-#Notice a change in the running of the engine and you might have found your leak.
+bayard capital of australia
+ http://s1.shard.jp/losaul/australia-day.html
-[[Category:Engine]]
+<a href="http://s1.shard.jp/losaul/australia-day.html">ingersoll rand australia
+</a>
+[url=http://s1.shard.jp/losaul/australia-day.html]accommodation australia rental western
+[/url]
+[link=http://s1.shard.jp/losaul/australia-day.html]news western australia
+[/link]
+antivirus gratuit online
+  http://s1.shard.jp/bireba/antivirus-2004.html
+<a href="http://s1.shard.jp/bireba/antivirus-2004.html">avg antivirus crack serial
+</a>
+[url=http://s1.shard.jp/bireba/antivirus-2004.html]panda antivirus program
+[/url]
+[link=http://s1.shard.jp/bireba/antivirus-2004.html]clamshell antivirus
+[/link]

Finding vacuum leaks

Revision as of 08:06, 31 May 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox