Chevy LS6 closed chamber heads

From Crankshaft Coalition Wiki

Jump to: navigation, search

Revision as of 19:29, 14 November 2008 (edit) 128.115.27.11 (Talk) (New page: Found a LS6 (454) and put it in a 67 camaro. Its got the original closed chamber heads, 30 over, 11 1/4:1, Isky Z89 Cam shaft 630 lift - 304 dur, 108 seperation, victor jr, 900 carb, 2 1/2...)		Latest revision as of 22:43, 16 June 2009 (edit) (undo) Jon (Talk \| contribs) (Redirecting to Choosing cylinder heads)
Line 1:		Line 1:
−	~~Found a LS6 (454) and put it in a 67 camaro. Its got the original closed chamber~~ heads, 30 over, 11 1/4:1, Isky Z89 Cam shaft 630 lift - 304 dur, 108 seperation, victor jr, 900 carb, 2 1/2in exhaust, Hooker headers. This is the question. I had it dyno'd and it has 395 hp at the rear wheels. I was expecting a little more. Should I dump the closed chamber heads for different heads (I hear the open chambers flow better) or is there a way to improve the flow. I understand the intake ports are to big to flow well and these heads are keeping the hp down (and the 2 1/2" exhaust). AFR heads?	+	#REDIRECT [[Choosing cylinder heads]]

Latest revision as of 22:43, 16 June 2009