1940 Ford Pickup recessed tail lights
| Line 73: | Line 73: | ||
[[File:16_pair_of_lites.JPG]] | [[File:16_pair_of_lites.JPG]] | ||
| + | |||
| + | |||
| + | '''LENS MOUNTING''' | ||
| + | |||
| + | There are a couple of ways to mount the lens unit to the pan surface, one choice would be to spot weld a screw stud to the inner surface and mount the light with a star washer to prevent movement and the other, mount the lens with GE Silicon ll chalking. I put a dab on each mounting hole (4 of them) and press the lens firmly in place and used a piece of masking tape to hold it in position until the silicon set up. The light has a 100,000 hour life and I don't see replacing it too soon and if I had to a razor knife will get it out of there fast. | ||
Your Privacy Choices