Rust

Jump to: navigation, search
m (Notes)
(Notes)
Line 9: Line 9:
 
#Apply jelly with 000 steel wool, rub it in, and allow it to set for a couple of minutes. Don't let it dry.
 
#Apply jelly with 000 steel wool, rub it in, and allow it to set for a couple of minutes. Don't let it dry.
 
#Rub again with steel wool. Repeat a few times, and then clean the area. Dry it immediately.
 
#Rub again with steel wool. Repeat a few times, and then clean the area. Dry it immediately.
 +
 +
*To convert/neutralize rust
 +
# A rust converter/neutralizer containing phospheric acid or another type of acid shold be used
 +
# Be careful of getting this stuff on your concrete floor as it will bubble and decompose it
 +
# Follow the instructions on the bottle when you are done there should be a fine coating on the metal which will help prevent further rust from developing
 +
# This stuff is hard on paintbrushes(eats away the brisles) and you must be very careful of your eyes. Also it will ruin paint so again use caution.
  
  

Revision as of 17:41, 13 September 2006

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox