Decking a block
(Created page with 'Setting the squish is a must-do if you expect optimum performance on pump gas. It is generally accepted that 0.035" to 0.045" is pretty much ideal. You can do it with a 0.025" pi…') |
m (Add category) |
||
| Line 14: | Line 14: | ||
One more thing. Measure all volumes so that you can figure the static compression ratio for yourself when you have finalized all your parts buying. You will need a lot of information including the exact SCR in order to intelligently choose a camshaft. All of the cam grinders have a free service where you call them up and tell them all about your build and they suggest the perfect cam for your motor. Use this service. | One more thing. Measure all volumes so that you can figure the static compression ratio for yourself when you have finalized all your parts buying. You will need a lot of information including the exact SCR in order to intelligently choose a camshaft. All of the cam grinders have a free service where you call them up and tell them all about your build and they suggest the perfect cam for your motor. Use this service. | ||
If you don't know how to figure static compression ratio or which volumes are involved, just ask me. I will be glad to explain it to you. | If you don't know how to figure static compression ratio or which volumes are involved, just ask me. I will be glad to explain it to you. | ||
| + | [[Category:Undeveloped articles]] | ||
Your Privacy Choices