Intake manifold

Jump to: navigation, search
(Add text, links; minor clean up)
m (Using early intake on later (non Vortec) heads)
Line 128: Line 128:
  
 
===Using early intake on later (non Vortec) heads===
 
===Using early intake on later (non Vortec) heads===
On the 1986-back heads and intakes, the center four bolts were the same angle as the other bolts. 1987-up use a different angle except for Corvette aluminum heads. To compensate, spacer/washers can be made or [http://www.holley.com/90748.asp '''bought'''] to allow the intake to fit.
+
On the 1986-back heads and intakes, the center four bolts were the same angle as the other bolts. 1987-up use a different 72 degree angle except for Corvette aluminum heads. To compensate, spacer/washers can be made or [http://www.holley.com/90748.asp '''bought'''] to allow the intake to fit.
  
 
Photos and text on using [http://www.summitracing.com/parts/PFS-52112/ spacers from Professional Products] is [http://webcache.googleusercontent.com/search?q=cache:bcfaJAnphjUJ:www.persh.org/pickup/TBI%2520Intake%2520Manifold.htm+&cd=1&hl=en&ct=clnk&gl=us&client=firefox-a '''here'''].
 
Photos and text on using [http://www.summitracing.com/parts/PFS-52112/ spacers from Professional Products] is [http://webcache.googleusercontent.com/search?q=cache:bcfaJAnphjUJ:www.persh.org/pickup/TBI%2520Intake%2520Manifold.htm+&cd=1&hl=en&ct=clnk&gl=us&client=firefox-a '''here'''].

Revision as of 17:30, 9 October 2012

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox