Automobile body and frame rotisserie
(→Body - Frame Rotisserie) |
(→Design) |
||
| Line 6: | Line 6: | ||
# Elimination of hours looking up into nooks and crannies of underside while scraping, brushing, sanding, repair. | # Elimination of hours looking up into nooks and crannies of underside while scraping, brushing, sanding, repair. | ||
== Design == | == Design == | ||
| − | # Load -- consider weight and flex of body. | + | # Load -- consider weight and flex of body. If the load gets outside of the base, the whole thing tips over. |
| − | # Swing -- consider shape and dimensions of body and the space in which it will rotate about its center of gravity. | + | # Swing -- consider shape and dimensions of body and the space in which it will rotate about its center of gravity. Pivots must be in line. Anything on a radius from either pivot will reduce the swing capacity; distance of pivot from obstructions determines swing capacity. |
# Materials -- steel pipe, tubing, angle, plate, bolts, welding rods or wire. | # Materials -- steel pipe, tubing, angle, plate, bolts, welding rods or wire. | ||
| − | # Construction methods -- | + | # Construction methods -- weld, bolt. |
| + | |||
== Build == | == Build == | ||
# Acquisition of materials -- salvage, new. | # Acquisition of materials -- salvage, new. | ||
Your Privacy Choices