Ford engine specifications
(Add text; minor clean up) |
(Minor clean up) |
||
| Line 53: | Line 53: | ||
*Bore and stoke 4.00" x 2.87" | *Bore and stoke 4.00" x 2.87" | ||
*200 to 225 horsepower with 282 to 305 ft/lb torque depending on engine code | *200 to 225 horsepower with 282 to 305 ft/lb torque depending on engine code | ||
| − | *Two or four barrel carburetor depending on engine code | + | *Two barrel or four barrel Autolite carburetor depending on engine code |
*Hydraulic camshaft | *Hydraulic camshaft | ||
| Line 60: | Line 60: | ||
*Same block casting as other 289 engines, but with larger two-bolt main caps. These same type caps were later used on the Mexican 302 block. | *Same block casting as other 289 engines, but with larger two-bolt main caps. These same type caps were later used on the Mexican 302 block. | ||
*Higher nodular cast iron content crankshaft with added on front counterweight to offset the beefier caps and 3/8" rod hardware. Originally HiPo cranks had orange paint on counterweight. | *Higher nodular cast iron content crankshaft with added on front counterweight to offset the beefier caps and 3/8" rod hardware. Originally HiPo cranks had orange paint on counterweight. | ||
| − | * | + | *Added on front counterweight on crankshaft required a different timing gear |
*Beefier balancer | *Beefier balancer | ||
*3/8" rod bolts | *3/8" rod bolts | ||
| − | * | + | *Mechanical lifter camshaft |
*Dual point distributor without vacuum advance | *Dual point distributor without vacuum advance | ||
| − | *Heads have two dots cast above "289", non HiPo heads have one dot. Have | + | *Screw in rocker studs |
| + | *Heads have two dots cast above "289", non HiPo heads have one dot. Have machine finished valve spring cups cast into the head. Both small (11.6:1 cr 1963-4/64;10.5:1 cr 1965) and large (10:1 cr, 1966-'67) chamber heads were used w/either 1.67" (before 4-'64) or 1.78" (4-'64 to '67) intake valves. All exhaust valves (low and HiPo) were 1.45". | ||
*Autolite 4100 595 cfm four barrel carburetor on a cast iron intake manifold | *Autolite 4100 595 cfm four barrel carburetor on a cast iron intake manifold | ||
*Better flowing cast iron exhaust manifolds | *Better flowing cast iron exhaust manifolds | ||
| − | ==== | + | ====Shelby GT 350==== |
| + | *Made from 1965 to 1967 | ||
*Rated at 306 HP at 6000 rpm and 329 ft/lb torque at 4200 rpm | *Rated at 306 HP at 6000 rpm and 329 ft/lb torque at 4200 rpm | ||
*High rise aluminum Cobra intake manifold | *High rise aluminum Cobra intake manifold | ||
Your Privacy Choices