Vortec L31 cylinder head
m (→Vortec-specific domed pistons) |
m (→Vortec-specific domed pistons) |
||
| Line 216: | Line 216: | ||
The reason for domed pistons is because the large port Bow Tie Vortec head can only be milled to about 51 cc. This will give about 12:1 CR using flat top pistons. So if a higher CR is required, domed pistons must be used. An engine built with ''unported'' large port Bow Tie heads (FASCAR (Florida Association of Stock Car Racing rules) made over [http://www.chevyhiperformance.com/techarticles/148_0506_gm_bow_tie_vortec_small_block_engine/viewall.html 630 HP/500 ft/lb torque] with 12:1 CR. | The reason for domed pistons is because the large port Bow Tie Vortec head can only be milled to about 51 cc. This will give about 12:1 CR using flat top pistons. So if a higher CR is required, domed pistons must be used. An engine built with ''unported'' large port Bow Tie heads (FASCAR (Florida Association of Stock Car Racing rules) made over [http://www.chevyhiperformance.com/techarticles/148_0506_gm_bow_tie_vortec_small_block_engine/viewall.html 630 HP/500 ft/lb torque] with 12:1 CR. | ||
| + | |||
| + | See the discussion page for more. | ||
==Recommended spark plugs== | ==Recommended spark plugs== | ||
Your Privacy Choices