Head gasket
(→Head gasket re-torquing: add text, image, link) |
m (→Head gasket torquing) |
||
| Line 159: | Line 159: | ||
[[File:80632permatex.jpg|right]] | [[File:80632permatex.jpg|right]] | ||
| − | If using OEM fasteners, most times the recommendation is for the clean threads to be lubricated with motor oil before torquing. Fasteners that enter the cooling jackets have to be sealed. Various sealants can be used depending on personal preference. Some sealers are: | + | If using OEM fasteners, most times the recommendation is for the clean threads to be lubricated with motor oil before torquing. Threaded holes can be cleaned with a thread chaser. Do not use a tap for this, it can enlarge the hole and/or thin the threads by removing metal, increasing the chance of pulling the threads. |
| + | |||
| + | Fasteners that enter the cooling jackets have to be sealed. Various sealants can be used depending on personal preference. Some sealers are: | ||
*Hylomar | *Hylomar | ||
*Permatex #2 | *Permatex #2 | ||
Your Privacy Choices