Pistons and rings
(→KB ring gap and piston to wall clearance instructions: minor clean up) |
m (→Top ring) |
||
| Line 71: | Line 71: | ||
*0.0050" for drag or road race | *0.0050" for drag or road race | ||
*0.0055" for supercharged or nitrous use | *0.0055" for supercharged or nitrous use | ||
| − | {{Warning|Be aware that there are pistons like some made by Keith Black that use a wider top ring gap than what is normally recommended by ring manufacturers or other piston manufacturers. So be sure to check and follow the '''piston''' manufacturer's instructions, if they differ from the ring manufacturer's instructions.}} | + | {{Warning|Be aware that there are pistons like some made by Keith Black (KB info below) that use a wider top ring gap than what is normally recommended by ring manufacturers or other piston manufacturers. So be sure to check and follow the '''piston''' manufacturer's instructions, if they differ from the ring manufacturer's instructions.}} |
===Second ring=== | ===Second ring=== | ||
Your Privacy Choices