Installing brakes
(→Prepairing to install: add text, image) |
m (→Preparing to install: minor clean up) |
||
| Line 24: | Line 24: | ||
The new pads need to slide freely in the caliper or on the mount. Rust can be removed with a file or wire brush if needed. Never grind the pads to fit. | The new pads need to slide freely in the caliper or on the mount. Rust can be removed with a file or wire brush if needed. Never grind the pads to fit. | ||
| − | [[File:Clamp vice grips.jpg|right]] | + | [[File:Clamp vice grips.jpg|right|300px]] |
Open the bleeder and push the cylinder back into the caliper until it is flush, you can use a caliper tool, a clamping vise grip (right), or a c-clamp to accomplish this, then close bleeder. | Open the bleeder and push the cylinder back into the caliper until it is flush, you can use a caliper tool, a clamping vise grip (right), or a c-clamp to accomplish this, then close bleeder. | ||
| − | + | <br style="clear:both"/> | |
You never want to push old dirty fluid back through the system. This would be a good time to flush the brake system and refill it with new, clean fluid. | You never want to push old dirty fluid back through the system. This would be a good time to flush the brake system and refill it with new, clean fluid. | ||
Your Privacy Choices