Porting cylinder heads
m |
(→Installing screw in rocker arm studs: add text) |
||
| Line 53: | Line 53: | ||
==Installing screw in rocker arm studs== | ==Installing screw in rocker arm studs== | ||
[[File:POW351300.jpg|thumb|400px|left|Stud puller/tap guide for SBC]] <br style="clear:both"/> | [[File:POW351300.jpg|thumb|400px|left|Stud puller/tap guide for SBC]] <br style="clear:both"/> | ||
| + | |||
| + | When screw in studs are going to be installed, the stud boss will usually need to be machined shorter to make up for the thickness of the guide plate (if used) and for the hex portion of the stud and the radius between the hex and the stud. In the case of the SBC, 0.400" is usually a safe amount to remove, but this can vary some depending on the exact parts used. | ||
==Milling the deck== | ==Milling the deck== | ||
Your Privacy Choices