Starter motors
(→Starter noses: add caption text; format images) |
(→Adjustment) |
||
| Line 74: | Line 74: | ||
===Adjustment=== | ===Adjustment=== | ||
| + | A noisy starter may be because the gears are meshing too close. The use of shims reduces the noise by increasing the distance between the gears. | ||
| + | |||
When using shims you need to have 1/8" clearance, a 1/8" drill bit or allen wrench works well for this. | When using shims you need to have 1/8" clearance, a 1/8" drill bit or allen wrench works well for this. | ||
| − | A | + | |
| + | A page on how and why to use shims is [[Media:Delco_remy_starter_shim_bulletin_tbstr01-2.pdf|'''here''']]. | ||
==GM starter solenoid== | ==GM starter solenoid== | ||
Your Privacy Choices