How to remove a starter
(E) |
|||
| Line 1: | Line 1: | ||
How to remove a starter on a1994-199? Chevy Blazer, S10, Bravada, ec. with 4.3 Vortec | How to remove a starter on a1994-199? Chevy Blazer, S10, Bravada, ec. with 4.3 Vortec | ||
| + | |||
Tools need: | Tools need: | ||
8mm wrench | 8mm wrench | ||
| + | |||
8mm or 5/16,13mm,14mm,15mm (3/8 drive sockets)1/4 drive 11mm deep socket | 8mm or 5/16,13mm,14mm,15mm (3/8 drive sockets)1/4 drive 11mm deep socket | ||
| + | |||
extensions | extensions | ||
| + | |||
1/4in and 3/8in drive ratchet, if bolts are tight use breaker bar. | 1/4in and 3/8in drive ratchet, if bolts are tight use breaker bar. | ||
| + | |||
jack and jackstands | jack and jackstands | ||
| + | |||
lug wrench/3/4 socket with 1/2in drive breaker bar | lug wrench/3/4 socket with 1/2in drive breaker bar | ||
INSTRUCTIONS: | INSTRUCTIONS: | ||
1. Remove the negative battery cable( use 8mm socket or wrench, and jack up the truck/suv. | 1. Remove the negative battery cable( use 8mm socket or wrench, and jack up the truck/suv. | ||
| + | |||
2.Remove wheel and disconnect Battery cable, and 'S' terminal, with 13mm and 8mm sockets, the 'S' termninal nut is easy to remove | 2.Remove wheel and disconnect Battery cable, and 'S' terminal, with 13mm and 8mm sockets, the 'S' termninal nut is easy to remove | ||
using a fine tooth ratchet. | using a fine tooth ratchet. | ||
| + | |||
3. Remove and support the starter, for better access remove the torque converter cover, ( 4 bolts, and the transmission line bolted to the engine oil pan with a 11mm socket | 3. Remove and support the starter, for better access remove the torque converter cover, ( 4 bolts, and the transmission line bolted to the engine oil pan with a 11mm socket | ||
| + | |||
4 Remove the starter, and install the rebuilt/new starter, and do put everything you removed to get to the stater | 4 Remove the starter, and install the rebuilt/new starter, and do put everything you removed to get to the stater | ||
Your Privacy Choices