Steering shaft assemblies from junkyard parts
(→Putting it together) |
(→Putting it together) |
||
| Line 42: | Line 42: | ||
From left to right: 1st is the double D shaft and tube, with the tube having a set screw and jam nut. 2nd is the outer steering joint, with a lower steering column bearing attached, which goes ino the tube that is coming out of the firewall. This helps to hold everything, for added safety. You can't see it in the photo below, but it also has a set screw and nut on the Double D tube. Also, a set screw and jam nut has been added to the opposite side of the locking bolt. 3rd is the inner steering joint that attaches to the column on the inside of the cab. 4th is the bottom of the '93 Buick Park Avenue steering column that's being used in this example. | From left to right: 1st is the double D shaft and tube, with the tube having a set screw and jam nut. 2nd is the outer steering joint, with a lower steering column bearing attached, which goes ino the tube that is coming out of the firewall. This helps to hold everything, for added safety. You can't see it in the photo below, but it also has a set screw and nut on the Double D tube. Also, a set screw and jam nut has been added to the opposite side of the locking bolt. 3rd is the inner steering joint that attaches to the column on the inside of the cab. 4th is the bottom of the '93 Buick Park Avenue steering column that's being used in this example. | ||
| − | [[Image:Steering_joint_assembly2.jpg|frame|none|Steering joint assembly.]] | + | [[Image:Steering_joint_assembly2.jpg|frame|none|Steering joint assembly, shown with steering column.]] |
==Intersecting the firewall== | ==Intersecting the firewall== | ||
Your Privacy Choices