Rust
(→Axle tube rust) |
(→Surface rust removal technique) |
||
| Line 51: | Line 51: | ||
#Working in 1-2 square feet at a time, wearing rubber gloves, scrub with naval jelly and steel wool. Don't let the naval jelly dry, keep it wet, squirt with bottle. | #Working in 1-2 square feet at a time, wearing rubber gloves, scrub with naval jelly and steel wool. Don't let the naval jelly dry, keep it wet, squirt with bottle. | ||
#Rinse and re-apply naval jelly if necessary, to get to clean shiny metal. | #Rinse and re-apply naval jelly if necessary, to get to clean shiny metal. | ||
| − | #When finished with an area, wipe off excess naval jelly with paper towel, squirt on warm soapy water, and dry thoroughly. | + | #When finished with an area, wipe off excess naval jelly with paper towel, squirt on warm soapy water, and dry thoroughly. Can then sand with 180 grit. |
After that, you can just use wax and grease remover, and then paint with epoxy primer. | After that, you can just use wax and grease remover, and then paint with epoxy primer. | ||
Your Privacy Choices