How to choose a SBC engine

From Crankshaft Coalition Wiki
Jump to: navigation, search
 
Line 1: Line 1:
Engine choices can be hard when there are so many to choose from.. The choice of a SBC can be an easy one if you want a cheap reliable engine that can produce a good amount of horsepower.. As a SBC can come in a size as small as 262 CI all the way to well over 400 CI in custom built engines, they all have there purpose. you wouldn't put a 262 in a truck, but you may put it in a Monza if you want MPG
+
Engine choices can be hard when there are so many to choose from. The choice of a SBC can be an easy one if you want a cheap reliable engine that can produce a good amount of horsepower. As a SBC can come in a size as small as 262 CI all the way to well over 400 CI in custom built engines, they all have their purpose. You wouldn't put a 262 in a truck, but you may put it in a Monza if you want [[Improving fuel economy|MPG]].
  
  
 +
* 262 CI: Used in 1975, low hp, smog engine designed for reliability with high MPG. Only used with the Chevrolet Nova and Monza (with 4.3L badges when optioned with the Monza) - NOT to be confused with the 1985-2014 4.3L V6-90 which has the bore/stroke of the SBC 350. Was replaced by the 305.
 +
* 265 CI: Chevrolet's first SBC. Far surpassed in performance by the 283 and 327 engines that came shortly after. Consider this one for restorations only (unless you like a challenge). An unrelated 265 appeared in 1994 as an LT1 derivative using the bore of the 305 and fitted with a 3 inch stroke crank and 5.94" rods.
 +
* 267 CI: Used from 1978-1981, low hp, smog engine designed for reliability with high MPG. Bore diameter shared with the 200 (a V6-90 which predated the 4.3L).
 +
* 283 CI: Chevy's first engine to produce 1hp per CI. Provides hp in the higher RPM, good for [[Reducing vehicle weight|light cars]] and higher RPM in performance applications.
 +
* 301 CI:  This is a 0.125" overbored SBC 283, it needs a block with thick cylinder walls (recommend sonic testing first) and is no longer recommended (or necessary) practice, instead the preferred method is to use a 350 block and a 283 crank with spacer bearings if you want to build one. Actual displacement is 301.6 cid.
 +
* 302 CI: The first Z/28 engine (1967-'69). Great for high RPM hp and was mandated for T/A racing. Original SBC 302 engines and 302-specific parts are usually very expensive.
 +
* 305 CI: Decent engine, many consider it too small for hi-performance, but decent enough for street performance in a [[Reducing vehicle weight|lightweight car]]. Main deficit is the bore diameter limits valve size.
 +
* 307 CI: Effectively a large-journal 327 crank with a 283 bore size. Limited performance potential.
 +
* 327 CI: Considered a good engine for higher RPM hp, can be built for street performance.
 +
* 334 CI: 305 block with 400 crank. Most practical where emissions require specific engine/vehicle combinations (like CA).
 +
* 350 CI: America's most popular SBC. Not much needs to be said, they fit most budgets and expectations, great all around engine. Mid-1980s onward have a 5.7L embossed on the bellhousing lip.
 +
* 353 CI: 400 block with 327 crank.
 +
* 377 CI: This is a 400 block with a 350 crank and either custom crankshaft, or factory spec main journal crank using special bearings or bearing spacers.
 +
* 383 CI: 350 block with a 3.75 crank. Popular performance combination. Initially required external balancing but internal balance cranks are common today.
 +
* 400 CI: Stock cranks are external balanced, crank manufacturers are currently producing internal balanced cranks.
  
* 262 CI: used from 1978-1981, low hp, smog engine designed for reliability with high MPG
+
The original standard bore and stroke for each:
* 265 CI: Chevrolet's first SBC. Far surpassed in performance by the 283 and 327 engines that came shortly after.. consider this one for restorations only
+
* 262 CI: 3.671" x 3.100"
* 267 CI: used from 1978-1981, low hp, smog engine designed for reliability with high MPG.
+
* 265 CI: 3.750" x 3.000"
* 283 CI: Chevy's first engine to produce 1hp per CI. provides hp in the higher RPM, good for light cars and higher RPM
+
* 267 CI: 3.500" x 3.480"
* 301 CI:  This is a .125 overbore 283, it only works on some blocks and is no longer recommended practice
+
* 283 CI: 3.875" x 3.000"
* 302 CI: The Z/28 engine used for a short while. Great for high RPM hp and T/A racing... if you can find one
+
* 302 CI: 4.000" x 3.000"
* 305 CI: Decent engine, not good for performance, but decent enough for a lightweight or the vehicles they came in
+
* 305 CI: 3.736" x 3.480"
* 327 CI: Good engine for higher RPM hp, can be built for high RPM racing and such.. strong runners
+
* 307 CI: 3.875" x 3.250"
* 350 CI: America's most popular SBC.. not much need be said, they fit most budgets and expectations, great all around engine
+
* 327 CI: 4.000" x 3.250"
* 355 CI: .030 over 350
+
* 350 CI: 4.000" x 3.480"
* 358 CI: .060 over 350
+
* 400 CI: 4.125" x 3.750"
* 383 CI: 350 block with a 3.75 crank.. Considered when low end hp or torque are necessary.. requires external balancing
+
 
* 400 CI: Requires external balancing, decent engine all togther.
+
==Related articles==
 +
*[[Why not to use a small-block Chevy engine]]
 +
*[[The controversial Chevy small block engine]]
  
 
[[Category:Engine]]
 
[[Category:Engine]]
 +
[[Category:GM]]

Latest revision as of 04:42, 24 June 2018

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox