First paint job
From Crankshaft Coalition Wiki
(→Tips) |
(→Metallic paint: adding my single stage metallic technique) |
||
| Line 99: | Line 99: | ||
HVLP (High Volume Low Pressure) is the way to go when buying a spray gun although LVLP (Low Volume Low Pressure) can work acceptably with the right paint. The prices have come down to reasonable levels, and the wasted paint by overspray (not to mention the mess) makes a siphon-feed unit a poor choice for the home hobby sprayer. | HVLP (High Volume Low Pressure) is the way to go when buying a spray gun although LVLP (Low Volume Low Pressure) can work acceptably with the right paint. The prices have come down to reasonable levels, and the wasted paint by overspray (not to mention the mess) makes a siphon-feed unit a poor choice for the home hobby sprayer. | ||
| − | Remember that high-solid primers like high-build type 2K urethanes require a larger (1.7mm) tip and setup internally than a regular paint gun. Three gun sets are available for as little as $100 that include a primer gun with the larger tip, a paint/clear gun, and a 1.0mm tipped touch-up gun. Cutting (wet sanding) and buffing make up for a lot of shortcomings in inexpensive HVLP guns. So determining which is more valuable, your money or your time, is a determining factor in choosing a paint gun. A cheaper gun will require more time spent cutting and buffing than a top-of-the-line gun that lays paint out more evenly, but at an added price of several hundred dollars. A budget gun can be had for under $30, whereas a SATA 3000 digital runs around $650. You decide which is more important. | + | Remember that high-solid primers like high-build type 2K urethanes require a larger (1.7mm) tip and setup internally than a regular paint gun. Three gun sets are available for as little as $100 that include a primer gun with the larger tip, a paint/clear gun, and a 1.0mm tipped touch-up gun. Cutting (wet sanding) and buffing make up for a lot of shortcomings in inexpensive HVLP guns. So determining which is more valuable, your money or your time, is a determining factor in choosing a paint gun. A cheaper gun will require more time spent cutting and buffing than a top-of-the-line gun that lays paint out more evenly, but at an added price of several hundred dollars. A budget gun can be had for under $30, whereas a SATA 3000 digital runs around $650. You decide which is more important. A decent middle of the road option is a Finex 1000, 2000, 3000 series by Sharpe. The 1000 model is a small touch up gun, the 2000 a panel sized gun and the 3000 big enough for a complete vehicle. As of the year 2020, they run between $150-250 depending on size and where you buy. They have a pretty wide selection of tips/cones for spraying various viscosity coatings. Of course there are other brand name of spray guns and most have an economy line. One important tip! Any activated primer or paint WILL solidify in your gun if you don't clean it out within a certain amount of time. |
==Choosing the right type of paint== | ==Choosing the right type of paint== | ||
| Line 117: | Line 117: | ||
===Three stage:=== | ===Three stage:=== | ||
| − | Base coat, then pearl or metallic, then a clear coat. | + | Base coat, then pearl, candy or metallic, then a clear coat. (A candy coat has quite a bit of clear mixed in so that when you spray it, you don't completely cover the base color but instead, tint it) |
==Two main types of all automotive paint colors== | ==Two main types of all automotive paint colors== | ||
| Line 125: | Line 125: | ||
===Metallic paint=== | ===Metallic paint=== | ||
| − | Spraying metallic is a little different then spraying a solid color; they can easily mottle (have blotches of dark and light areas) and/or "tiger stripe" if sprayed incorrectly. The key to spraying metallic paint is to [http://www.hotrodders.com/forum/tip-day-30-a-74674.html move the "dry spot" around]. For example, spray one coat one direction, then the next coat in the direction 90 degrees to the first coat. Overlapping the coats up to 75% is another key to good metallic finishes. | + | Spraying metallic is a little different then spraying a solid color; they can easily mottle (have blotches of dark and light areas) and/or "tiger stripe" if sprayed incorrectly. The key to spraying metallic paint is to [http://www.hotrodders.com/forum/tip-day-30-a-74674.html move the "dry spot" around]. For example, spray one coat one direction, then the next coat in the direction 90 degrees to the first coat. Overlapping the coats up to 75% is another key to good metallic finishes. Yet another way is to do two wet coats, followed by a mist coat at just the right time. The mist coat will melt slowly into the wet coats yet leave an even metallic pattern. Most of this applies to a single stage metallic paint job. The base coat/clear coat systems are much more forgiving with metallics. |
Remember, anytime that the paint moves the metallic does as well, so if they run you will get the metallic all in one spot. With metallic, always use the suggested reducers and mix the entire batch to be sprayed at the same time. DO NOT play mad scientist/chemist. ''Follow the instructions to the letter''. The engineers at the paint companies spend millions on R&D, so they are already sure of the results you will get by mixing the product any given way. Do not re-invent the wheel. | Remember, anytime that the paint moves the metallic does as well, so if they run you will get the metallic all in one spot. With metallic, always use the suggested reducers and mix the entire batch to be sprayed at the same time. DO NOT play mad scientist/chemist. ''Follow the instructions to the letter''. The engineers at the paint companies spend millions on R&D, so they are already sure of the results you will get by mixing the product any given way. Do not re-invent the wheel. | ||
Your Privacy Choices