Cam and compression ratio compatibility
From Crankshaft Coalition Wiki
(→Dynamic compression ratio) |
(Undo revision 3477941 by 164.90.34.153 (talk)) |
||
| Line 1: | Line 1: | ||
| + | |||
| + | |||
==Matching cam to compression ratio== | ==Matching cam to compression ratio== | ||
Sometimes it's difficult trying to explain to fellows who are new to hot rodding that you have to match the characteristics of the camshaft to the static compression ratio of the motor along with the operating range where the cam makes power. The camshaft is not a stand-alone piece. It must be coordinated with other motor and drivetrain parts in order to arrive at a combination of parts that will all work together toward a common goal. | Sometimes it's difficult trying to explain to fellows who are new to hot rodding that you have to match the characteristics of the camshaft to the static compression ratio of the motor along with the operating range where the cam makes power. The camshaft is not a stand-alone piece. It must be coordinated with other motor and drivetrain parts in order to arrive at a combination of parts that will all work together toward a common goal. | ||
| Line 55: | Line 57: | ||
|- | |- | ||
|} | |} | ||
| − | |||
==Additional reading/engine theory== | ==Additional reading/engine theory== | ||
{{Note1}} | {{Note1}} | ||
| Line 106: | Line 107: | ||
*[http://www.uempistons.com/calc.php?action=comp2 Dynamic compression calculator] by KB | *[http://www.uempistons.com/calc.php?action=comp2 Dynamic compression calculator] by KB | ||
*[http://www.wallaceracing.com/dynamic-cr.php Wallace Racing DCR calculator] | *[http://www.wallaceracing.com/dynamic-cr.php Wallace Racing DCR calculator] | ||
| − | {{Note1}} Some dynamic compression ratio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point | + | {{Note1}} Some dynamic compression ratio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point nnbfigure. This works OK on older, slower ramped cam lobes, but the faster lobe profiles may need to have 25 degrees or more added to be accurate. |
===Cam phasing=== | ===Cam phasing=== | ||
| Line 120: | Line 121: | ||
*[http://www.wallaceracing.com/dynamic-cr.php Wallace Racing DCR calculator] | *[http://www.wallaceracing.com/dynamic-cr.php Wallace Racing DCR calculator] | ||
*[http://www.empirenet.com/pkelley2/DynamicCR.html Kelly DCR calculator] | *[http://www.empirenet.com/pkelley2/DynamicCR.html Kelly DCR calculator] | ||
| − | *[http://www. | + | *[http://www.uempistons.com/calc.php?action=comp2 KB/Silvolite DCR calculator] |
*[http://www.rbracing-rsr.com/comprAdvHD.htm RSR DCR calculator] | *[http://www.rbracing-rsr.com/comprAdvHD.htm RSR DCR calculator] | ||
{{Note1}} Some dynamic compression rtatio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point figure. This works OK on older, slower ramped cam lobes, but the faster lobe profiles may need to have 25 degrees or more added to be accurate. | {{Note1}} Some dynamic compression rtatio calculators (like KBs) ask for an additional 15 degrees of duration be added to the IVC @ 0.050" lift point figure. This works OK on older, slower ramped cam lobes, but the faster lobe profiles may need to have 25 degrees or more added to be accurate. | ||
| Line 128: | Line 129: | ||
# Add the results to the lobe separation angle (LSA) | # Add the results to the lobe separation angle (LSA) | ||
# Subtract any ground-in advance | # Subtract any ground-in advance | ||
| − | # Subtract 180 | + | # Subtract 180 |
| − | + | This result does not need to have any amount added to the IVC point, like the KB calculator calls for. | |
==Compression ratio calculators== | ==Compression ratio calculators== | ||
| Line 161: | Line 162: | ||
[[Category:Camshaft]] | [[Category:Camshaft]] | ||
| + | <pre style="border:none;"> | ||
General Application Chart * | General Application Chart * | ||
Advertised | Advertised | ||
| Line 176: | Line 178: | ||
290°+ 3.73+ 3400-8000 | 290°+ 3.73+ 3400-8000 | ||
10.5 to 12 3500+ | 10.5 to 12 3500+ | ||
| + | </pre> | ||
Your Privacy Choices