Ford C4 transmissions

Jump to: navigation, search

Revision as of 16:23, 18 August 2023 (edit) 184.155.19.204 (Talk) (→Basic rebuild information) ← Older edit		Revision as of 16:26, 18 August 2023 (edit) (undo) 184.155.19.204 (Talk) (→Main case roller clutch, rear band, and drum install) Newer edit →
Line 28:		Line 28:


−	Snap ring installed on the ~~output~~ shaft. Snap ring sets on top of the rear ring gear before the rear planet is installed. This retains the shaft into the transmission. If the snap ring will not go into the groove, recheck the parts installation to resolve the clearance problem.	+	Snap ring installed on the out put shaft. Snap ring sets on top of the rear ring gear before the rear planet is installed. This retains the shaft into the transmission. If the snap ring will not go into the groove, recheck the parts installation to resolve the clearance problem.

	[[file:C-4_build_-_14.jpg\|frame\|none\|Snap ring shown installed.]]		[[file:C-4_build_-_14.jpg\|frame\|none\|Snap ring shown installed.]]

Revision as of 16:26, 18 August 2023