Removing a 60's Ford headlight switch
From Crankshaft Coalition Wiki
(Created page with 'The 6o's ford headlight switch Is retained to the instrument panel with a special bezel nut. First pull the headlighe switch knob out to the headlight on position. Reach up arou…') |
|||
| Line 1: | Line 1: | ||
| − | The | + | |
| + | The '60s ford headlight switch is retained to the instrument panel with a special bezel nut. | ||
| + | *First pull the headlight switch knob out to the headlight "ON" position. | ||
| + | *Reach up around the instrument panel to the switch opposite where the wire harness connects. There is a release button about the size of a pencil eraser. | ||
| + | *Push it in and wiggle the switch knob in and out to get it to release. | ||
| + | *Then pull the knob shaft all the way out. | ||
| + | *The retaining nut has either 2 or 4 recesses like a Philips screw. Usually a flat blade screw driver the right width will work to unscrew the nut. | ||
| + | *Unclip the harness and install your new switch with the special bezel nut. | ||
| + | *When you reinstall the knob shaft YOU MUST PUSH IN THE RELEASE BUTTON. If you just jam it in, you will break the ceramic dash light | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | [[Category:Electrical]] | ||
| + | [[Category:Ford]] | ||
Your Privacy Choices