Removing a 60's Ford headlight switch
From Crankshaft Coalition Wiki
m (Add category) |
|||
| Line 1: | Line 1: | ||
| − | + | ||
The '60s ford headlight switch is retained to the instrument panel with a special bezel nut. | The '60s ford headlight switch is retained to the instrument panel with a special bezel nut. | ||
*First pull the headlight switch knob out to the headlight "ON" position. | *First pull the headlight switch knob out to the headlight "ON" position. | ||
| Line 7: | Line 7: | ||
*The retaining nut has either 2 or 4 recesses like a Philips screw. Usually a flat blade screw driver the right width will work to unscrew the nut. | *The retaining nut has either 2 or 4 recesses like a Philips screw. Usually a flat blade screw driver the right width will work to unscrew the nut. | ||
*Unclip the harness and install your new switch with the special bezel nut. | *Unclip the harness and install your new switch with the special bezel nut. | ||
| − | *When you reinstall the knob shaft YOU MUST PUSH IN THE RELEASE BUTTON. If you just jam it in, you will break the ceramic dash light | + | *When you reinstall the knob shaft YOU MUST PUSH IN THE RELEASE BUTTON. If you just jam it in, you will break the ceramic dash light |
| − | + | ||
| + | |||
| + | |||
| + | |||
[[Category:Electrical]] | [[Category:Electrical]] | ||
[[Category:Ford]] | [[Category:Ford]] | ||
Your Privacy Choices