Mopar rear axle spotter's guide
From Crankshaft Coalition Wiki
(→ID by shape) |
|||
| Line 1: | Line 1: | ||
| − | + | ||
==Introduction== | ==Introduction== | ||
| − | There have been several very good Mopar rear axles used through the years. This page will help ID | + | There have been several very good Mopar rear axles used through the years. This page will help ID the more commonly used/swapped rear axles from the 1950s to the present. |
==ID by shape== | ==ID by shape== | ||
| − | The easiest way to identify an axle is to look at the cover on the carrier housing: | + | [[File:Mopar rear id.jpg|thumb|left|600px|Image from [http://www.forbbodiesonly.com/moparforum/showthread.php?t=6190 forbbodiesonly.com]]] |
| − | *7-1/4" has a 9 bolt rear cover. | + | The easiest way to identify an axle is to look at the cover on the carrier housing: <br><br> |
| − | *8-1/4" has 10 bolts, evenly spaced. The cover is almost perfectly round. | + | *7-1/4" has a 9 bolt rear cover.<br><br><br> weakest |
| − | *8-3/4" has no rear cover. The back of the axle housing is round. The center section is removable from the front of the housing. | + | *8-1/4" has 10 bolts, evenly spaced. The cover is almost perfectly round.<br> <br> 200-400HP max |
| − | *9-1/4" has a 12 bolt rear cover. Rear cover is roughly octagonal (stop sign-shaped). | + | *8-3/4" has no rear cover. The back of the axle housing is round. The center section is removable from the front of the housing.<br><br><br> strong max 900-1000 HP |
| − | *9-3/4" has a 10 bolt rear cover. The cover is wider on the driver side. | + | *9-1/4" has a 12 bolt rear cover. Rear cover is roughly octagonal (stop sign-shaped).<br><br><br> stronger |
| + | *9-3/4" has a 10 bolt rear cover. The cover is wider on the driver side. strongest | ||
| + | |||
| + | <br style="clear:both"/> | ||
==Casting numbers== | ==Casting numbers== | ||
| Line 34: | Line 37: | ||
:3507891 | :3507891 | ||
:3723199 | :3723199 | ||
| + | |||
| + | ==Rear axle dimensions== | ||
| + | [[File:Mopar rear axle dimensions.jpg|thumb|left|500px|Rear axle dimensions from [http://moparinterests.blogspot.com/2010/09/mopar-rear-axle-dimensions.html Moparinterests blogspot.com]]] <br style="clear:both"/> | ||
| + | |||
| + | [[File:Mopar rear end axle flange id.jpg|thumb|left|900px|Axle flange dimensions from [http://moparinterests.blogspot.com/2010/09/mopar-rear-axle-dimensions.html Moparinterests blogspot.com]]] <br style="clear:both"/> | ||
==Fender tag and broadcast sheet codes== | ==Fender tag and broadcast sheet codes== | ||
| Line 48: | Line 56: | ||
*[http://www.genocide2600.com/~traviso/mml/bodydecode.html ''How to Decode your MoPar''] | *[http://www.genocide2600.com/~traviso/mml/bodydecode.html ''How to Decode your MoPar''] | ||
*[http://www.allpar.com/ allpar.com] | *[http://www.allpar.com/ allpar.com] | ||
| − | + | *[[Rearend identification]] | |
| + | *[[Mopar tapered axle rear brake conversion]] | ||
| + | |||
[[Category:Rearend]] | [[Category:Rearend]] | ||
[[Category:Identification and decoding]] | [[Category:Identification and decoding]] | ||
Your Privacy Choices