Carb vacuum port ID
From Crankshaft Coalition Wiki
(Add table) |
|||
Line 68: | Line 68: | ||
Many Holley 4150/4160 carbs will have a ported vacuum port on the side of the metering block. The other vacuum ports will usually be manifold vacuum. | Many Holley 4150/4160 carbs will have a ported vacuum port on the side of the metering block. The other vacuum ports will usually be manifold vacuum. | ||
− | == | + | ==Engine diagnosis using a vacuum gauge== |
− | + | *'''[[Vacuum gauge engine diagnosis]]''' | |
− | + | *'''[[Finding vacuum leaks]]''' | |
+ | *[http://www.classictruckshop.com/clubs/earlyburbs/projects/vac/uum.htm Vacuum gauge chart] | ||
+ | *[http://www.secondchancegarage.com/public/186.cfm How to Use and Interpret a Vacuum Gauge] | ||
+ | *[http://www.gregsengine.com/using-a-vacuum-gauge.html Engine Testing with a Vacuum Gauge] | ||
+ | |||
+ | ==Table of diagnostic vacuum readings== | ||
+ | |||
+ | bgcolor="white"> | ||
<td colspan="3"> </td> | <td colspan="3"> </td> | ||
</tr> | </tr> | ||
− | <tr bgcolor=" | + | <tr bgcolor="#CCCCFF"> |
− | <th width="26%"> | + | <th width="26%">ENGINE RPM</th> |
− | <th width="28%"> | + | <th width="28%">GAUGE READING</th> |
− | <th width="46%"> | + | <th width="46%">ENGINE CONDITION</th> |
</tr> | </tr> | ||
<tr bgcolor="white"> | <tr bgcolor="white"> | ||
<td width="26%">Smooth and steady idle<br> (800 to 1200 RPM)</td> | <td width="26%">Smooth and steady idle<br> (800 to 1200 RPM)</td> | ||
<td width="28%">Between 17 to 21 inches</td> | <td width="28%">Between 17 to 21 inches</td> | ||
− | <td width="46%">Engine is in | + | <td width="46%">Engine is in good condition, but perform next test to be sure.</td> |
</tr><tr bgcolor="lightgrey"> | </tr><tr bgcolor="lightgrey"> | ||
<td width="26%">Open and close throttle quickly</td> | <td width="26%">Open and close throttle quickly</td> | ||
<td width="28%">Jumps from 2 to about 25 inches</td> | <td width="28%">Jumps from 2 to about 25 inches</td> | ||
− | <td width="46%">Engine is in | + | <td width="46%">Engine is in good condition.</td> |
</tr><tr bgcolor="white"> | </tr><tr bgcolor="white"> | ||
<td width="26%">Smooth and steady idle</td> | <td width="26%">Smooth and steady idle</td> | ||
Line 96: | Line 103: | ||
</tr><tr bgcolor="white"> | </tr><tr bgcolor="white"> | ||
<td width="26%">Steady idle</td> | <td width="26%">Steady idle</td> | ||
− | <td width="28%">Intermittent dropping back 3 | + | <td width="28%">Intermittent dropping back 3 to 5 inches and returns to normal</td> |
− | <td width="46%">Sticky | + | <td width="46%">Sticky valves. If injection of penetrating oil into intake manifold temporarily stops pointer from dropping back, it's certain the valves are sticking.</td> |
</tr><tr bgcolor="lightgrey"> | </tr><tr bgcolor="lightgrey"> | ||
<td width="26%">Steady 3000 RPM</td> | <td width="26%">Steady 3000 RPM</td> | ||
− | <td width="28%">Pointer fluctuates rapidly, | + | <td width="28%">Pointer fluctuates rapidly, increasing engine speed causes more pointer swing</td> |
<td width="46%">Weak valve springs.</td> | <td width="46%">Weak valve springs.</td> | ||
</tr><tr bgcolor="white"> | </tr><tr bgcolor="white"> | ||
<td width="26%">Steady idle</td> | <td width="26%">Steady idle</td> | ||
− | <td width="28%">Fast fluctuation between 14 to 19 | + | <td width="28%">Fast fluctuation between 14 to 19 inches</td> |
<td width="46%">Worn intake valve stem guides. Excessive pointer vibration at all speeds indicates a leaky head gasket.</td> | <td width="46%">Worn intake valve stem guides. Excessive pointer vibration at all speeds indicates a leaky head gasket.</td> | ||
</tr><tr bgcolor="lightgrey"> | </tr><tr bgcolor="lightgrey"> | ||
<td width="26%">Steady idle</td> | <td width="26%">Steady idle</td> | ||
<td width="28%">Constant drop</td> | <td width="28%">Constant drop</td> | ||
− | <td width="46%">Burnt valve or insufficient tappet clearance holding valve partly open or a spark plug occasionally | + | <td width="46%">Burnt valve or insufficient tappet clearance holding valve partly open or a spark plug occasionally misfiring.</td> |
</tr><tr bgcolor="white"> | </tr><tr bgcolor="white"> | ||
<td width="26%">Steady idle</td> | <td width="26%">Steady idle</td> | ||
Line 121: | Line 128: | ||
<td width="26%">Steady idle</td> | <td width="26%">Steady idle</td> | ||
<td width="28%">Drifting from 14 to 16 inches</td> | <td width="28%">Drifting from 14 to 16 inches</td> | ||
− | <td width="46%">Plug gaps too close or points not | + | <td width="46%">Plug gaps too close or points not adjusted correctly. Damaged plug or |
− | + | coil wire</td> | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + |