How to remove a starter

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-How to remove a starter on a1994-199? Chevy Blazer, S10, Bravada, ec. with 4.3 Vortec
-Tools need:
-mm wrench
-mm or 5/16,13mm,14mm,15mm (3/8 drive sockets)1/4 drive 11mm deep socket
-extensions
-/4in and 3/8in drive ratchet, if bolts are tight use breaker bar.
-jack and jackstands
-lug wrench/3/4 socket with 1/2in drive breaker bar
-INSTRUCTIONS:
-. Remove the negative battery cable( use 8mm socket or wrench, and jack up the truck/suv.
-.Remove wheel and disconnect Battery cable, and  'S' terminal, with 13mm and 8mm sockets, the 'S' termninal nut is easy to remove
-using a fine tooth ratchet.
-. Remove and support the starter, for better access remove the torque converter cover, ( 4 bolts, and the transmission line bolted to the engine oil pan with a 11mm socket
-Remove the starter, and install the rebuilt/new starter, and do put everything you removed to get to the stater

Latest revision as of 08:04, 23 December 2024